Order Rear spoiler online
Heckspoiler | Heckflügel mit ABE für Seat Ibiza 5 (6F) HF209
CSR-Automotive Heckspoiler | Heckflügel | Hecklippe | Abrisskante für Seat Ibiza 5 (6F) mit ABE (Eintragungsfrei!)Heckspoiler passend für Seat Ibiza 5 (6F) Baujahr 2017-passend für alle Modell-/Karosserievariantennur passend in Kombination mit CSR-HF206Seitenteil-Set (2-teilig)Mit ABE (allgemeine Betriebserlaubnis) und somit eintragungsfreiGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels 3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackHeckflügel ist aus hochwertigen Material ABS gefertigtInklusive Montagezubehör, sofern notwendigInklusive MontageanleitungMaterial ist flexibel
Rear spoiler | rear wing for Skoda Fabia 3 (Typ NJ) Monte Carlo HF383
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Skoda Fabia 3 (Typ NJ) Monte CarloRear spoiler suitable for Skoda Fabia 3 (Typ NJ), model year 2015-2021Suitable for the model/body variant(s) Monte Carlo (hatchback)Not suitable for CombiCertificate in preparation (will be sent afterwards as soon as available). If required, we tin supply this item in advance together with a material certificate (this is not a parts certificate within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ Tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-configured and pre-mounted adhesive tapeStick it on, job done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fixing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively reduced, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing for Audi A6 C9 Avant HF381
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi A6 C9 AvantRear spoiler suitable for Audi A6 C9 from model year 2025-Suitable for the Avant model/body style variant(s)Rear wing below the rear windowReport in preparation (will be sent on afterwards as soon as available). On request, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses within the bond line are effectively absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing for Audi A6 C9 Avant HF380
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi A6 C9 AvantRear spoiler suitable for Audi A6 C9, model year 2025-suitable for the model/body variant(s) Avant (base model, edition one, S-Line and S6)Certificate in preparation (will be sent later as soon as available). If requested, we tin supply this item in advance together with a material report (this is not type approval documentation within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetically neat visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing for Ford Mustang MK7 GT Coupe HF379
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Ford Mustang MK7 GT CoupeRear spoiler suitable for Ford Mustang MK7, model year 2023-Suitable for the model/body variant(s) GT CoupeApproval documentation in preparation (will be sent afterwards as soon as available). On request, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and straightforward attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesionInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeApply and that's it!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are excellently absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing for VW T5 (Type 7H/7E) HF378
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for VW T5 (Type 7H/7E)Rear spoiler suitable for VW T5 (Type 7H/7E), model year 2003-2015suitable for all model/body variants except vehicles with dropside body or barn doorsSide sections (2-piece)Documentation in preparation (will be sent afterwards as soon as available). On request, we tin supply this item in advance together with material documentation (this is not Teilegutachten documentation within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-fabricated and pre-mounted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceSimple removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing for VW T5 (Type 7H/7E) HF377
CSR-Automotive rear spoiler | rear wing | rear spoiler lip | trailing edge for VW T5 (Type 7H/7E)Rear spoiler suitable for VW T5 (Type 7H/7E), model years 2003-2015suitable for all model/body variants except vehicles with a flatbed or barn doorsDocumentation in preparation (will be sent afterwards as soon as available). If required, we tin supply this item in advance together with material documentation (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bonding forceFitting with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeApply, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively reduced, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation, only applicable in Germany for Audi Q5 / SQ5 (GU) Sportback HF376
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi Q5 / SQ5 (GU) Sportback with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Audi Q5 / SQ5 (GU) model year 2024-suitable for the Sportback model/body style variant(s)Rear wing below the rear windowSupplied with ABE (general type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and straightforward fitting using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high adhesive strengthInstallation with 3M™ Tape PT 1100 is completed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-configured and pre-mounted tapeApply, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively reduced, creating exceptionally durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation, only applicable in Germany for Audi Q5 / SQ5 (GU) Sportback HF375
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi Q5 / SQ5 (GU) Sportback with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Audi Q5 / SQ5 (GU) model year 2024-Suitable for the Sportback model/body style variant(s)With ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but developed specifically for this vehicle type!Clean and easy fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear wing made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation, only applicable in Germany for Opel Frontera HF374
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Opel Frontera with ABE (no registration required in Germany!)Rear spoiler suitable for Opel Frontera model year 2024-Suitable for the model/body variant(s) Edition, GS and UltimateSupplied with ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetically neat visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation, only applicable in Germany for Mercedes-Benz S-Class W223 / V223 HF373
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Mercedes-Benz S-Class W223 / V223 with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Mercedes-Benz S-Class W223 / V223, model year 2020-Suitable for all model/body variants (including AMG Line, AMG and EditionAlso suitable for the long-wheelbase versionWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to PT1100’s unique viscoelastic properties, stresses in the bond are excellently absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing manufactured from high-quality ABSIncludes fitting accessories, if requiredIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Citroen C3 / e-C3 HF371
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Citroen C3 / e-C3 with ABE (no registration required in Germany!)Rear spoiler suitable for Citroen C3 / e-C3, model year 2024-Suitable for all model/body variants except 113 Urban-RangeSupplied with ABE documentation (general operating permit), so no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with the 3M™ PT 1100 tape is carried out in three easy steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are excellently dissipated, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damaging the paintworkRear spoiler is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for Genesis GV70 (JK1) HF369
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Genesis GV70 (JK1) with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Genesis GV70 (JK1), model year 2024-suitable for all model/body variantsWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing supplied with ABE documentation, only applicable in Germany for BYD Seal HF368
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for BYD Seal with ABE documentation (no registration required in Germany!)Rear spoiler suitable for BYD Seal, model year 2022-suitable for all model/body variants (Comfort, Design and Excellence AWD)Supplied with ABE documentation (general operating permit) and therefore no registration required in GermanyExcellent fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ adhesive tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are superbly reduced, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for MG 3 (3rd gen) HF367
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for MG 3 (3rd gen) with ABE (no registration required in Germany!)Rear spoiler suitable for MG 3 (3rd gen), model year 2024-Suitable for all model/body variantsWith ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive forceInstallation with 3M™ PT 1100 tape is carried out in three easy steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing made from high-quality ABSMounting accessories included, where necessaryFitting instructions includedMaterial is flexible
Heckspoiler | Heckflügel für Skoda Elroq (Typ NY) HF353
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Skoda Elroq (Type NY)Rear spoiler suitable for Skoda Elroq (Type NY), model year 2025-Suitable for all model/body variants (including Sportline and RS)Report in preparation (will be sent separately as soon as available). If requested, we tin supply this item in advance together with a material report (this is not a type approval document within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are reduced exceptionally well, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRear wing made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | Rear wing for Audi A5 B10 (Type FU) Saloon HF329
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi A5 B10 (Type FU) saloonRear spoiler suitable for Audi A5 B10 (Type FU), model year 2024-Suitable for the saloon model/body style variant(s)Not suitable for S5Report in preparation (will be sent on once available). If required, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO)Good fit, as this is not a universal part but developed specifically for this vehicle type!Clean and straightforward fitting using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively reduced, creating highly durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for Mercedes-Benz CLE (236) Cabriolet HF310
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Mercedes-Benz CLE (236) Cabrio with ABE (no registration required in Germany!)Rear spoiler suitable for Mercedes-Benz CLE (236), model year 2024-suitable for the Cabrio model/body variant(s)not suitable for AMGSupplied with ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and straightforward attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-prepared and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good conformability to the surfaces being bonded. The unique viscoelastic properties of PT1100 help to absorb stresses in the bond line exceptionally well, creating highly durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for Ford Tourneo Custom (2nd Gen) HF309
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Ford Tourneo Custom (2nd gen) with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Ford Tourneo Custom (2nd gen), model year 2023-Suitable for the L1 and L2 model/body variants (Titanium, Active, Titanium X)Not suitable for SportSupplied with ABE documentation and therefore no registration required in GermanyGood fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bond strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to PT1100's unique viscoelastic properties, stresses in the bond line are excellently reduced, resulting in extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintRear wing is made from high-quality ABSIncludes fitting accessories, if requiredIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation, only applicable in Germany for Ford Puma '20 HF233
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Ford Puma '20 with ABE (no registration required in Germany!)Rear spoiler suitable for Ford Puma '20, model year 2019-Suitable for the ST, ST X, ST-Line Vignale and ST-Line X model/body variantsSupplied with ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and straightforward fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bonding strengthFitting with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-mounted adhesive tapeApply and stick in place, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | Rear wing for BMW 5 Series G31 Touring HF188
CSR-Automotive rear spoiler | rear wing | rear spoiler lip | trailing edge for BMW 5 Series G31 TouringRear spoiler suitable for BMW 5 Series G31 year of manufacture 2017-2024suitable for the model/body style variant(s) TouringReport in preparation (will be sent afterwards as soon as available). If desired, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively relieved, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for BMW 2 Series F74 M Sport Package Pro / M235 HF322
CSR-Automotive rear spoiler | rear wing | rear spoiler lip | trailing edge spoiler for BMW 2 Series F74 M Sport Package Pro / M235 with ABE documentation (no registration required in Germany!)Rear spoiler suitable for BMW 2 Series F74 model year 2025-suitable for the Gran Coupé model/body variant(s) (M Sport Package Pro and M235)With ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grip and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-configured and pre-fitted tapeApply, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideal for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Rear spoiler | Rear wing supplied with ABE documentation for Jaguar F-Pace (X761) HF316
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Jaguar F-Pace (X761) with ABE (no registration required in Germany!)Rear spoiler suitable for Jaguar F-Pace (X761), model year 2016-Suitable for all model/body variants (including facelift)Not suitable for SVRWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and high bonding strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces to be bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are excellently dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, if requiredIncludes fitting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE documentation for Nissan NV300 / Primastar HF308
CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Nissan NV300 / Primastar with ABE documentation (no registration required in Germany!)Rear spoiler suitable for Nissan NV300 / Primastar, model year 2021-Suitable for all model/body variants with tailgateSupplied with ABE documentation (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-mounted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideal for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers excellent adhesion to a wide range of automotive surfaces, good internal strength, outstanding long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is manufactured from high-quality ABSIncluding fitting accessories, where necessaryIncluding fitting instructionsMaterial is flexible