Buy Roof valleys online
Roof fins with ABE documentation for Hyundai i30 (PD) Fastback DF050
CSR-Automotive roof fins for Hyundai I30 (PD) Fastback with ABE/TTGRoof fin set (left and right) suitable for Hyundai I30 (PD) model year 2017-Suitable for the Fastback model/body variants (including Fastback N / N-Performance)Supplied with ABE (general operating permit) / TTG (type approval) documentation, only applicable in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high adhesive strengthFitting with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond are effectively reduced, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins for Kia Ceed (CD) hatchback DF069
CSR-Automotive roof fins for Kia Ceed (CD) hatchbackroof fin set (left and right) suitable for Kia Ceed (CD) model year 2018-2025suitable for the hatchback model/body variant(s)not suitable for ProCeed and SWdocumentation in preparation (will be sent later as soon as available). If required, we tin supply this item in advance together with material documentation (this is not Teilegutachten documentation within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted tapeStick it on, job done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkroof fins are made from high-quality ABSincludes fitting accessories, where necessaryincludes fitting instructionsmaterial is flexible
Roof fins for Hyundai i20 (BC3) DF068
CSR-Automotive roof fins for Hyundai i20 (BC3)Roof fin set (left and right) suitable for Hyundai i20 (BC3), model year 2020-suitable for all model/body variants including N / N-PerformanceTechnical documentation in preparation (will be sent later as soon as available). On request, we tin supply this item in advance together with material documentation (this is not Teilegutachten documentation within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited to fastening rigid add-on parts where an attractive exposed edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively reduced, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncluding fitting accessories, where necessaryIncluding fitting instructionsMaterial is flexible
Roof fins for Peugeot 508 2 Saloon DF066
CSR Automotive roof fins for Peugeot 508 2 saloonRoof fins set (left and right) suitable for Peugeot 508 2, model years 2018-2025suitable for the saloon body styleDocumentation in preparation (will be sent as soon as available). If requested, we tin supply this item in advance together with material documentation (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is completed in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideal for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damaging the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins for Renault / Alpine 5 E-Tech / A290 DF062
CSR Automotive roof fins for Renault / Alpine 5 E-Tech / A290roof fins set (left and right) suitable for Renault / Alpine 5 E-Tech / A290 from 2024-suitable for all model/body variantsreport in preparation (will be sent later as soon as available). On request, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers excellent adhesion to a wide range of automotive surfaces, good internal strength, outstanding long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncluding fitting accessories, if requiredIncluding fitting instructionsMaterial is flexible
Roof fins for Mercedes-Benz A-Class W176 hatchback DF061
CSR-Automotive roof fins for Mercedes-Benz A-Class W176 hatchbackroof fin set (left and right) suitable for Mercedes-Benz A-Class W176, model year 2012-2018suitable for the hatchback model/body style variant(s)approval documentation in preparation (will be sent afterwards as soon as available). On request, we tin supply this item in advance together with material documentation (this is not type approval documentation within the meaning of Section 19.3 of the German Road Traffic Licensing Regulations)Good fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthFitting with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetically neat visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are reduced extremely effectively, resulting in highly durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatherEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, if necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Ford Mustang MK7 Coupe DF060
CSR Automotive roof fins for Ford Mustang MK7 Coupe with ABE (no registration required in Germany!)Roof fins set (left and right) suitable for Ford Mustang MK7, model year 2023-suitable for the Coupe model/body style variant(s)With ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and straightforward attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-mounted tapeStick on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideal for attaching rigid add-on parts where a neat visible edge is desired. PT1100 offers excellent adhesion to a wide range of automotive surfaces, good internal strength, outstanding long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation, only applicable in Germany for Audi Q5 / SQ5 (GU) Sportback DF059
CSR Automotive roof fins for Audi Q5 / SQ5 (GU) Sportback with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for Audi Q5 / SQ5 (GU) model year 2024-suitable for the Sportback model/body variant(s)Supplied with ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and straightforward fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted adhesive tapeStick it in place, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for MG 3 (3rd gen) DF058
CSR Automotive roof fins for MG 3 (3rd gen) with ABE documentation (no registration required in Germany!)Roof fin set (left and right) suitable for MG 3 (3rd gen), model year 2024-Suitable for all model/body variantsSupplied with ABE (general operating permit) documentation, therefore no registration required in GermanyGood fit, as this is not a universal part but was specifically developed for this vehicle type!Clean and straightforward attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthFitting with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-fitted and pre-assembled tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively reduced, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for BYD Seal DF057
CSR Automotive roof fins for BYD Seal with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for BYD Seal from model year 2022-Suitable for all model/body variantsWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but developed specifically for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetically pleasing visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively reduced, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncluding fitting accessories, if requiredIncluding fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Mercedes-Benz A-Class W177 hatchback DF056
CSR Automotive roof fins for Mercedes-Benz A-Class W177 hatchback with ABE (no registration required in Germany!)roof fin set (left and right) suitable for Mercedes-Benz A-Class W177, model year 2018-suitable for the hatchback body style(s) (including AMG)not suitable for saloonSupplied with ABE documentation (general operating permit), only applicable in Germany and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ PT 1100 adhesive tape is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted adhesive tapeStick in place, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specifically developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetically pleasing visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Audi A4 / S4 B9 (Type 8W) saloon DF055
CSR Automotive roof fins for Audi A4 / S4 B9 (Type 8W) saloon with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for Audi A4 / S4 B9 (Type 8W) model years 2015-2024Suitable for saloon model/body variant(s)With ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with the 3M™ PT 1100 tape is completed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial bond strength, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are reduced exceptionally well, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Audi A5 / S5 B10 (Type FU) saloon DF053
CSR-Automotive roof fins for Audi A5 / S5 B10 (Type FU) saloon with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for Audi A5 / S5 B10 (Type FU), year from 2024-suitable for the saloon model/body style variant(s)With ABE (general operating permit) and therefore no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and straightforward fixing using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-cut and pre-assembled adhesive tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideal for fixing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively absorbed, creating exceptionally durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Honda Civic FK11/FK8 hatchback DF052
CSR Automotive roof fins for Honda Civic FK11/FK8 hatchback with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for Honda Civic FK11/FK8, model year 2015-2022Suitable for the model/body style variant(s) hatchback, incl. Type RWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetically pleasing visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, plus high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Porsche Cayman 987c DF051
CSR-Automotive roof fins for Porsche Cayman 987c with ABE (no registration required in Germany!)Roof fin set (left and right), suitable for Porsche Cayman 987c, model years 2005-2013Suitable for all model/body variantsSupplied with ABE (general operating approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and straightforward fixing using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with the 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating exceptionally durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins for Ford Focus MK4 hatchback DF046
CSR Automotive roof fins for Ford Focus MK4 hatchbackRoof fin set (left and right) suitable for Ford Focus MK4, model year 2018-suitable for the hatchback model/body variant(s)not suitable for TurnierDocumentation in preparation (will be sent later as soon as available). On request, we tin supply this item in advance together with material documentation (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with the 3M™ PT 1100 tape is completed in three easy steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted tapeStick it on and you're done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to PT1100's unique viscoelastic properties, stresses in the bond line are effectively absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for BMW 3 Series E92 / M3 E92 Coupe DF032
CSR Automotive roof fins for BMW 3 Series E92 / M3 E92 Coupe with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for BMW 3 Series E92 / M3 E92, model year 2006-2013Suitable for the coupe model/body style variant(s)With ABE (general operating permit), therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ PT 1100 adhesive tape is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted adhesive tapeStick in place, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for fixing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are absorbed exceptionally well, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation, only applicable in Germany for BMW 3 Series G20 / M3 G80 saloon DF030
CSR-Automotive roof fins for BMW 3 Series G20 / M3 G80 saloon with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for BMW 3 Series G20 / M3 G80 from 2019-Suitable for the saloon model/body variant(s)With ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and straightforward fixing using 3M™ Acrylic Plus PT 1100 adhesive tape with extremely high initial tack and strong adhesive strengthInstallation with the 3M™ PT 1100 adhesive tape is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted adhesive tapeStick it on, done!3M™ Acrylic Plus PT 1100 adhesive tape is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for BMW XM G09 DF028
CSR Automotive roof fins for BMW XM G09 with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for BMW XM G09, model year 2022-Suitable for all model/body variantsWith ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively absorbed, resulting in highly durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation, only applicable in Germany for VW Golf 5 (Type 1K) DF027
CSR-Automotive roof fins for VW Golf 5 (Type 1K) with ABE documentation (no registration required in Germany!)Roof fin set (left and right) suitable for VW Golf 5 (Type 1K), model year 2003-2008suitable for all model/body variants hatchback (all)not suitable for Golf PlusWith ABE documentation (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ adhesive tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-assembled and pre-fitted adhesive tapeStick it on, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are superbly dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damaging the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Mini Clubman F54 DF026
CSR Automotive roof fins for Mini Clubman F54 with ABE (no registration required in Germany!)Roof fin set (left and right), suitable for Mini Clubman F54, model years 2015-2024Suitable for all model/body variants (including JCW)Supplied with ABE (general operating permit) and therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and easy fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an attractive visible edge is desired. PT1100 offers excellent adhesion to a wide range of automotive surfaces, good internal strength, outstanding long-term stability and excellent adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation, only applicable in Germany for Mercedes-Benz EQE V295 saloon DF024
CSR Automotive roof fins for Mercedes-Benz EQE V295 saloon with ABE documentation (no registration required in Germany!)Roof fin set (left and right) suitable for Mercedes-Benz EQE V295, model year 2022-suitable for the saloon body styleSupplied with ABE documentation and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-prepared and pre-mounted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are exceptionally well absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Mercedes-Benz CLA C117 saloon DF023
CSR Automotive roof fins for Mercedes-Benz CLA C117 saloon with ABE (no registration required!)Roof fin set (left and right) suitable for Mercedes-Benz CLA C117, model years 2013-2019Suitable for the saloon body styleSupplied with ABE (general operating permit) and therefore no registration requiredGood fit, as this is not a universal part but was specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are absorbed exceptionally well, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Roof fins with ABE documentation for Toyota GR Yaris (XP21) DF022
CSR Automotive roof fins for Toyota GR Yaris (XP21) with ABE (no registration required in Germany!)Roof fin set (left and right) suitable for Toyota GR Yaris (XP21), model year 2020-Suitable for all model/body variantsSupplied with ABE documentation, therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and high adhesive strengthInstallation with 3M™ adhesive tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted adhesive tapeStick in place, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond are excellently absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible