Experience ultimate performance and aerodynamics with the new swan-neck rear spoiler from CSR-Automotive! The spoiler combines racing design, high quality, and maximum functionality – all with official component type approval (TTG), allowing you to use it legally on public roads. This is absolutely unique on the German market.
Including Component Type Approval (TTG)
We have developed the wing so that it can be used legally on public roads. Thanks to official type approval (TTG), the rear wing does not need to be registered.
Available for many vehicle models
The rear wing is already available for more than 70 vehicles. We are developing and expanding the range on a weekly basis and will offer it for all popular sedans, coupes, hatchbacks and station wagons.
Two different bracket designs
The swan neck wing is available for different body styles and in different designs. We offer two different bracket designs for sedans and coupes.
Swan-neck rear wing with ABE documentation for BMW 3 Series F30 / M3 F80 saloon SHF003
CSR-Automotive swan-neck rear wing for BMW 3 Series F30 / M3 F80 saloon with ABE (no registration required in Germany!)swan-neck rear wing suitable for BMW 3 Series F30 / M3 F80, year of manufacture 2011-2019suitable for the saloon model/body variant(s)swan-neck rear wing set consisting of wing panel and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear viewwith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: if your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.installation is carried out by bolting to the rear of the vehicle, fitting materials included in the scope of deliveryswan-neck rear wing is manufactured from high-quality GRPadvantages of this composite material: extremely high flexibility combined with high stability, impact resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional racing. The characteristic black surface is easy to work and guarantees professional results. CSR-Automotive GRP products are also ideal for repair and other conversion work thanks to their excellent cutting and bonding properties.uniform surface structure allows painting without major preparatory work (wing panel is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible
Swan-neck rear wing with ABE documentation for Toyota GT86 (ZN6) / Subaru BRZ (1st gen) SHF006
CSR-Automotive swan-neck rear wing for Toyota GT86 (ZN6) / Subaru BRZ (1st gen)Swan-neck rear wing suitable for Toyota GT86 (ZN6) / Subaru BRZ (1st gen), model years 2012-2020Suitable for all model/body stylesSwan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedThe swan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Skoda Enyaq iV Coupe SHF009
CSR Automotive swan-neck rear wing for Skoda Enyaq iV CoupeSwan-neck rear wing suitable for Skoda Enyaq iV, model year 2020-suitable for the Coupe model/body variant(s)swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceSupplied with ABE (general operating permit) / TTG (type approval), so no registration required in GermanyGood fitment, as this is not a universal part but has been specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure precise fitment and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and ensures professional results. Thanks to excellent cutting and bonding properties, GRP products from CSR Automotive are ideally suited to repair work and further conversion projects.Consistent surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation, only applicable in Germany for BMW 2 Series/M2 F22/F23/F87 Coupe SHF011
CSR-Automotive swan-neck rear wing for BMW 2 Series/M2 F22/F23/F87 Coupe and Convertible with ABE (no registration required!)Swan-neck rear wing suitable for BMW 2 Series/M2 F22/F23/F87, model year 11/2013-06/2021Suitable for the Coupe and Convertible body stylesSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (type approval) and therefore no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Fitted by bolting to the rear of the vehicle; fitting material included in the scope of deliverySwan-neck rear wing is made from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. GRP products from CSR-Automotive are ideally suited for repair and other conversion work thanks to excellent cutting and bonding properties.Consistent surface structure allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation, only applicable in Germany for BMW 3 Series E92 / M3 E92 Coupé SHF013
CSR Automotive swan-neck rear wing for BMW 3 Series E92 / M3 E92 Coupé with ABE documentation (no registration required in Germany!)Swan-neck rear wing suitable for BMW 3 Series E92 / M3 E92, model year 2006-2013Suitable for the coupé model/body style variant(s)Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is made from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motor racing. The distinctive black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Consistent surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for BMW 4 Series F32 Coupé SHF015
CSR Automotive swan-neck rear wing for BMW 4 Series F32 Coupe with ABE (no registration required!)Swan-neck rear wing suitable for BMW 4 Series F32 model years 10/2013-06/2021Suitable for the Coupe model/body variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval) documentation and therefore no registration requiredGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, impact resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are highly suitable for repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for BMW 4 Series G22 / M4 G82 Coupé SHF017
CSR Automotive swan-neck rear wing for BMW 4 Series G22 / M4 G82 Coupé with ABE (no registration required in Germany!)swan-neck rear wing suitable for BMW 4 Series G22 / M4 G82 from 2020 onwardssuitable for the coupé model/body variant(s)not suitable for M4 CSLswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear appearancewith ABE (general operating permit) / TTG (component type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.fitted by bolting to the rear of the vehicle, fitting materials included in the scope of deliveryswan-neck rear wing is made from high-quality GRPAdvantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent finishing properties and guarantees professional results. Thanks to its excellent cutting and bonding properties, CSR Automotive GRP products are ideally suited to repair work and further conversion work.Even surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)including fitting instructionsmaterial is flexible
Swan-neck rear wing with ABE documentation for Audi A5 / S5 / RS5 (8T) Coupe SHF012
CSR-Automotive swan-neck rear wing for Audi A5 / S5 / RS5 (8T) CoupeSwan-neck rear wing suitable for Audi A5 / S5 / RS5 (8T), model years 2007-2016suitable for the coupe model/body style variant(s)swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is made from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are also ideally suited to repair and other conversion work thanks to their excellent cutting and bonding properties.Even surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE for Audi A4 / S4 / RS4 B7 (Type 8E) / Seat Exeo Saloon SHF010
CSR Automotive swan-neck rear wing for Audi A4 / S4 / RS4 B7 (Type 8E) saloon / Seat Exeo saloonSwan-neck rear wing Suitable for Audi A4 / S4 / RS4 B7 (Type 8E), model years 2004-2008Suitable for the saloon model/body style(s)Suitable for Seat Exeo, model years 2008-2013Suitable for the saloon model/body style(s)Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be removed completely before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited for repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Infiniti Q60 / Q60S Coupé SHF014
CSR Automotive swan-neck rear wing for Infiniti Q60 / Q60S Coupeswan-neck rear wing suitable for Infiniti Q60 / Q60S, model year 2016-2022suitable for the Coupe model/body variant(s)swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewsupplied with ABE (general operating permit) / TTG (parts type approval) documentation and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: if your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.installation is carried out by bolting to the rear of the vehicle, fitting material includedthe swan-neck rear wing is made from high-quality GRPthe benefits of this composite material: extremely high flexibility combined with high stability, shatter resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited for repair work and further conversion work thanks to their excellent cutting and bonding properties.uniform surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible
Swan-neck rear wing with ABE documentation for Audi A3 / S3 / RS3 (8V) saloon SHF005
CSR Automotive swan-neck rear wing for Audi A3 / S3 / RS3 (8V) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Audi A3 / S3 / RS3 (8V) model year 05/2013-02/2020Suitable for the saloon model/body variant(s)Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splitting, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair and other conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE for Toyota GR86 (ZN8) / Subaru BRZ (2nd gen) SHF007
CSR-Automotive swan-neck rear wing for Toyota GR86 (ZN8) / Subaru BRZ (2nd gen)swan-neck rear wing suitable for Toyota GR86 (ZN8) / Subaru BRZ (2nd gen), model year 2021-suitable for all model/body variantsswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewwith ABE (general operating permit) / TTG (type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are includedswan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Audi TT (8J) Coupe SHF008
CSR Automotive swan-neck rear wing for Audi TT (8J) Coupeswan-neck rear wing suitable for Audi TT (8J), model year 2006-2014suitable for the Coupe model/body variant(s)not suitable for TT RSswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting it to the rear of the vehicle; fitting materials are includedswan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, shatter resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited for repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Fitting instructions includedMaterial is flexible
Swan-neck rear wing with ABE documentation for Nissan 350Z (Z33) Coupe SHF018
CSR Automotive swan-neck rear wing for Nissan 350Z (Z33) CoupeSwan-neck rear wing suitable for Nissan 350Z (Z33), model years 2002-2008suitable for the model/body variant(s) Coupenot suitable with Aero KitSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (component type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing made from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from GRP by CSR Automotive are ideally suited for repair and further conversion work thanks to excellent cutting and bonding properties.Even surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Audi A5 / S5 / RS5 (8T) Sportback SHF016
CSR-Automotive swan-neck rear wing for Audi A5 / S5 / RS5 (8T) Sportbackswan-neck rear wing suitable for Audi A5 / S5 / RS5 (8T), model year 2009-2016suitable for the Sportback model/body variant(s)swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval) documentation, therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Fitted by bolting to the rear of the vehicle, fitting hardware included in the scope of supplyswan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited for repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Audi TT RS 8J Coupe (RS only) SHF020
CSR Automotive swan-neck rear wing for Audi TT RS 8J Coupe (RS only) with ABE (no registration required in Germany!)swan-neck rear wing suitable for Audi TT RS 8J, model years 2009-2014suitable for the model/body variant(s) Coupe (RS only)brackets suitable for the mounting holes of the original wingswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear viewwith ABE (general operating approval) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.installation is carried out by bolting to the rear of the vehicle, fitting materials includedswan-neck rear wing is made from high-quality GRPthe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splitting and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and other conversion work thanks to their excellent cutting and bonding properties.uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible
Swan-neck rear wing with ABE documentation for Porsche 718 Cayman (Type 982) SHF021
CSR Automotive swan-neck rear wing for Porsche 718 Cayman (Type 982) with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Porsche 718 Cayman (Type 982), model year 2016-Suitable for all model/body variants except GT4Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle; fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation, only applicable in Germany for BMW 5 Series G30 / M5 F90 saloon SHF023
CSR-Automotive swan-neck rear wing for BMW 5 Series G30 / M5 F90 saloonSwan-neck rear wing suitable for BMW 5 Series G30 / M5 F90, model years 2017-2024Suitable for saloon model/body variantsSwan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but one specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle; fitting hardware is includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Thanks to excellent cutting and bonding properties, CSR-Automotive GRP products are ideally suited to repair work and other conversion projects.Consistent surface structure allows painting without major preparation work (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation, only applicable in Germany for BMW 4 Series / i4 G26 Gran Coupe SHF025
CSR Automotive swan-neck rear wing for BMW 4 Series / i4 G26 Gran CoupeSwan-neck rear wing for BMW 4 Series / i4 G26, model year 2021-Suitable for the Gran Coupe model/body variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fitment, as this is not a universal part but has been specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent processing properties and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for BMW 2 Series F74 Gran Coupe SHF026
CSR Automotive swan-neck rear wing for BMW 2 Series F74 Gran CoupeSwan-neck rear wing suitable for BMW 2 Series F74, year 2025-Suitable for the model/body variant(s) Gran Coupe (incl. M235)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is made from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splitting, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair work and other conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for BMW 4 Series F36 Gran Coupe SHF027
CSR Automotive swan-neck rear wing for BMW 4 Series F36 Gran CoupeSwan-neck rear wing suitable for BMW 4 Series F36, model years 2014-2021Suitable for the Gran Coupe model/body variant(s)Swan-neck rear wing set consisting of wing panel and vehicle-specific bracketsStriking motorsport design for an especially sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting material includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent finishing properties and guarantees professional results. GRP products from CSR Automotive are exceptionally well suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Porsche Cayman 987c SHF029
CSR Automotive swan-neck rear wing for Porsche Cayman 987cswan-neck rear wing suitable for Porsche Cayman 987c, model year 2005-2013compatible with all model/body variantsswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewwith ABE (general operating permit) / TTG (parts type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installation of the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is by bolting to the rear of the vehicle, fitting materials included in the scope of deliveryswan-neck rear wing is made from high-quality GRPThe benefits of this composite material: extremely high flexibility with high stability, impact resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface offers excellent working properties and guarantees professional results. CSR Automotive GRP products are outstandingly suited to repair work and further conversion projects thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for Toyota GR Supra (A90) SHF030
CSR Automotive swan-neck rear wing for Toyota GR Supra (A90) with ABE (no registration required!)swan-neck rear wing suitable for Toyota GR Supra (A90), model year 2019-suitable for all model/body variantsswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval) and therefore no registration requiredGood fit, as this is not a universal part but was specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are includedswan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and ensures professional results. CSR Automotive GRP products are also ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible
Swan-neck rear wing with ABE documentation for BMW 6 Series F13 Coupe SHF024
CSR Automotive swan-neck rear wing for BMW 6 Series F13 Coupe with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 6 Series F13, model years 2011-2018Suitable for the coupe model/body style(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is fitted as standard with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting material includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited for repair work and further conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible