Go to homepage
Welcome to CSR-Automotive. Here you will find tuning parts made in Germany.
€0.00
Go to homepage

Filter products

Heckspoiler | Heckflügel mit ABE für Seat Ibiza 5 (6F) HF209 Image 1

Heckspoiler | Heckflügel mit ABE für Seat Ibiza 5 (6F) HF209

CSR-Automotive Heckspoiler | Heckflügel | Hecklippe | Abrisskante für Seat Ibiza 5 (6F) mit ABE (Eintragungsfrei!)Heckspoiler passend für Seat Ibiza 5 (6F) Baujahr 2017-passend für alle Modell-/Karosserievariantennur passend in Kombination mit CSR-HF206Seitenteil-Set (2-teilig)Mit ABE (allgemeine Betriebserlaubnis) und somit eintragungsfreiGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels 3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackHeckflügel ist aus hochwertigen Material ABS gefertigtInklusive Montagezubehör, sofern notwendigInklusive MontageanleitungMaterial ist flexibel

From €114.00
Surface
Details
Schwanenhals Heckflügel mit ABE für Hyundai Genesis (BK/BK2) Coupe SHF103 Image 1

Swan-neck rear wing with ABE documentation for Hyundai Genesis (BK/BK2) Coupe SHF103

CSR Automotive swan-neck rear wing for Hyundai Genesis (BK/BK2) Coupe with ABE documentation (no registration required in Germany!)Swan-neck rear wing suitable for Hyundai Genesis (BK/BK2), model year 2008-2015Suitable for the Coupe model/body variant(s)For vehicles with a Hyundai OEM rear spoiler, this must be removed and the third brake light behind the rear window activated. The holes from the OEM rear spoiler can be used for fitting.Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle, fitting material included in the scope of deliveryThe swan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from GRP by CSR Automotive are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Consistent surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für BMW 6er / M6 (E63/E64) SHF097 Image 1

Swan-neck rear wing with ABE documentation for BMW 6 Series / M6 (E63/E64) SHF097

CSR Automotive swan-neck rear wing for BMW 6 Series / M6 (E63/E64) with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 6 Series / M6 (E63/E64), model year 2007-2010 (facelift)Suitable for all model/body variantsSwan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle; fitting materials are includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splitting, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für BMW 6er / M6 (E63/E64) SHF096 Image 1

Swan-neck rear wing with ABE documentation, only applicable in Germany, for BMW 6 Series / M6 (E63/E64) SHF096

CSR Automotive swan-neck rear wing for BMW 6 Series / M6 (E63/E64) with ABE documentation (no registration required in Germany!)Swan-neck rear wing suitable for BMW 6 Series / M6 (E63/E64), year of manufacture 2003-2007 (pre-facelift)suitable for all model/body variantsswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting material includedThe swan-neck rear wing is made from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair work and further conversions thanks to excellent cutting and bonding properties.Consistent surface structure allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Installation instructions includedMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Ford Mustang MK7 GT SHF093 Image 1

Swan-neck rear wing with ABE documentation for Ford Mustang MK7 GT SHF093

CSR Automotive Swan-neck rear wing for Ford Mustang MK7 GT with ABE (no registration required!)Swan-neck rear wing suitable for Ford Mustang MK7, year from 2023-suitable for the GT model/body variant(s)Swan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration requiredGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is fitted from the factory with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, shatter resistance, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work and guarantees professional results. Products made from GRP by CSR Automotive are ideally suited for repair work and further conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Audi A5 / S5 B10 (Typ FU) Limousine SHF092 Image 1

Swan-neck rear wing with ABE documentation for Audi A5 / S5 B10 (Type FU) Saloon SHF092

CSR-Automotive swan-neck rear wing for Audi A5 / S5 B10 (type FU) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Audi A5 / S5 B10 (type FU), model year 2024-Suitable for the saloon body style(s)On the S5, the original lip must be removedSwan-neck rear wing set consisting of wing element and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motor racing. The distinctive black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing element is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Cupra Tavascan SHF078 Image 1

Swan-neck rear wing with ABE documentation, only applicable in Germany for Cupra Tavascan SHF078

CSR Automotive swan-neck rear wing for Cupra Tavascan with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Cupra Tavascan model year 2023-Suitable for all model/body variantsSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating approval) / TTG (type approval for parts) and therefore no registration requiredGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure an accurate fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting material is includedThe swan-neck rear wing is made from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and other modification work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für BMW 2er F44 Gran Coupe SHF071 Image 1

Swan-neck rear wing with ABE documentation for BMW 2 Series F44 Gran Coupé SHF071

CSR Automotive swan-neck rear wing for BMW 2 Series F44 Gran Coupé with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 2 Series F44, model years 2020-2024Suitable for the Gran Coupé model/body style(s)Swan-neck rear wing kit comprising wing blade and vehicle-specific bracketsStriking motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (component type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure precise fitting and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair and further conversion work thanks to excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Ford Mustang MK6 Coupe SHF070 Image 1

Swan-neck rear wing with ABE documentation, only applicable in Germany for Ford Mustang MK6 Coupe SHF070

CSR Automotive swan-neck rear wing for Ford Mustang MK6 Coupé with ABE (no registration required in Germany!)swan-neck rear wing suitable for Ford Mustang MK6 year of manufacture 2014-2023suitable for the model/body variant(s) Coupéswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear appearancewith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are included in the scope of deliveryswan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited for repair and further conversion work thanks to excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Installation instructions includedMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Mercedes-Benz CLA (C117) Limousine SHF069 Image 1

Swan-neck rear wing with ABE documentation for Mercedes-Benz CLA (C117) saloon SHF069

CSR-Automotive Swan-neck rear wing for Mercedes-Benz CLA (C117) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Mercedes-Benz CLA (C117), model years 2013-2019Suitable for the saloon body styleSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) documentation, therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, impact resistance, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from GRP by CSR-Automotive are ideal for repair and other conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Mercedes-Benz C-Klasse (C205) Coupe SHF068 Image 1

Swan-neck rear wing with ABE documentation, only applicable in Germany for Mercedes-Benz C-Class (C205) Coupé SHF068

CSR Automotive swan-neck rear wing for Mercedes-Benz C-Class (C205) Coupé with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Mercedes-Benz C-Class (C205), model years 2014-2023Suitable for the Coupé model/body style variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but has been specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting hardware is includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair work and other modification work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Skoda Octavia 3 (Typ 5E) Limousine SHF067 Image 1

Swan-neck rear wing with ABE documentation for Skoda Octavia 3 (Type 5E) saloon SHF067

CSR Automotive swan-neck rear wing for Skoda Octavia 3 (Typ 5E) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Skoda Octavia 3 (Typ 5E), model years 2012-2020Suitable for the saloon body style(s) (including RS)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear endWith ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be fully removed before fitting the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Fitting is carried out by bolting to the rear of the vehicle, fitting material includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splitting and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair work and further conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Audi A5 / S5 / RS5 (F5) Coupe SHF066 Image 1

Swan-neck rear wing with ABE documentation for Audi A5 / S5 / RS5 (F5) Coupe SHF066

CSR Automotive swan-neck rear wing for Audi A5 / S5 / RS5 (F5) Coupe with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Audi A5 / S5 / RS5 (F5) model years 2016-2024Suitable for the Coupe model/body variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval), and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle; fitting materials included in the scope of deliverySwan-neck rear wing is manufactured from high-quality GRPAdvantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are exceptionally suitable for repair and further conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Including fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Kia Stinger SHF065 Image 1

Swan-neck rear wing with ABE documentation for Kia Stinger SHF065

CSR Automotive swan-neck rear wing for Kia Stinger with ABE (no registration required in Germany!)swan-neck rear wing suitable for Kia Stinger, model years 2017-2023suitable for all model/body variantsswan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear-end looksupplied with ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.fitted by bolting to the rear of the vehicle, fitting materials includedswan-neck rear wing is made from high-quality GRPthe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface offers excellent finishing properties and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair work and other conversion projects thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive prep work (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Honda Prelude V (BB) Coupe SHF064 Image 1

Swan-neck rear wing with ABE documentation for Honda Prelude V (BB) Coupe SHF064

CSR-Automotive swan-neck rear wing for Honda Prelude V (BB) Coupe with ABE (no registration required!)swan-neck rear wing suitable for Honda Prelude V (BB), year of manufacture 1997-2002suitable for the model/body style variant(s) Coupeswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewwith ABE (general operating permit) / TTG (type approval) and therefore no registration requiredGood fit, as this is not a universal part but was specially developed for this vehicle type!Important fitting note: If your vehicle is fitted from the factory with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.installation is via bolting to the rear of the vehicle, fitting material includedswan-neck rear wing is manufactured from high-quality GRPadvantages of this composite material: extremely high flexibility combined with high stability, resistance to shattering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited to repair work and further conversion projects thanks to their excellent cutting and bonding properties.uniform surface structure allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Hyundai I30 (PD) Fastback SHF063 Image 1

Swan-neck rear wing with ABE documentation, only applicable in Germany for Hyundai I30 (PD) Fastback SHF063

CSR Automotive swan-neck rear wing for Hyundai I30 (PD) Fastback with ABE (no registration required!)swan-neck rear wing suitable for Hyundai I30 (PD) model year 2017-2024suitable for the Fastback model/body variant(s) (including Fastback N)swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsstriking motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval) and therefore no registration requiredGood fit, as this is not a universal part but was specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Installation is carried out by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für VW Passat CC SHF062 Image 1

Swan-neck rear wing with ABE documentation for VW Passat CC SHF062

CSR Automotive swan-neck rear wing for VW Passat CC with ABE (no registration required!)Swan-neck rear wing suitable for VW Passat CC, model years 2008-2016Suitable for all model/body variantsSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) and therefore no registration requiredGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be removed completely before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is made from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional racing. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideal for repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Nissan 370Z (Z34) Coupe SHF061 Image 1

Swan-neck rear wing with ABE documentation for Nissan 370Z (Z34) Coupe SHF061

CSR Automotive swan-neck rear wing for Nissan 370Z (Z34) Coupe with ABE (no registration required!)Swan-neck rear wing suitable for Nissan 370Z (Z34), model year 2008-2020Suitable for the Coupe model/body style(s)Not suitable for Nismo and RoadsterSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating permit) / TTG (type approval) and therefore no registration requiredGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedThe swan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to shattering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für BMW 3er E90 / M3 E90 Limousine SHF060 Image 1

Swan-neck rear wing with ABE documentation for BMW 3 Series E90 / M3 E90 saloon SHF060

CSR-Automotive swan-neck rear wing for BMW 3 Series E90 / M3 E90 saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 3 Series E90 / M3 E90, model year 2005-2013Suitable for the saloon model/body style variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval for parts) and therefore no registration requiredGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Installation is via bolting to the rear of the vehicle; fitting materials are includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motor racing. The characteristic black surface is easy to work with and guarantees professional results. Thanks to excellent cutting and bonding properties, GRP products from CSR-Automotive are ideally suited to repair and further conversion work.Uniform surface structure allows painting without extensive preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Ford Mustang MK6 Cabrio SHF047 Image 1

Swan-neck rear wing with ABE documentation for Ford Mustang MK6 Convertible SHF047

CSR-Automotive swan-neck rear wing for Ford Mustang MK6 convertible with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Ford Mustang MK6, model years 2014-2023suitable for the convertible body style(s)swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear-end appearanceWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: if your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are included in the scope of deliverySwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR-Automotive are ideally suited for repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Installation instructions includedMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für VW Arteon (Typ 3H) Limousine SHF046 Image 1

Swan-neck rear wing with ABE documentation for VW Arteon (Type 3H) Saloon SHF046

CSR Automotive swan-neck rear wing for VW Arteon (Type 3H) saloonSwan-neck rear wing suitable for VW Arteon (Type 3H), model years 2017-2024suitable for the saloon model/body style(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsStriking motorsport design for a particularly sporty rear viewWith ABE (general type approval) / TTG (part type approval), and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle; fitting hardware includedThe swan-neck rear wing is made from high-quality GRPAdvantages of this composite material: extremely high flexibility combined with high stability, resistance to splitting, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent finishing properties and guarantees professional results. CSR Automotive GRP products are also highly suitable for repair work and further conversions thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,099.00
Model
Details
Schwanenhals Heckflügel mit ABE für Mercedes-Benz CLE 236 Cabrio SHF045 Image 1

Swan-neck rear wing with ABE documentation for Mercedes-Benz CLE 236 Convertible SHF045

CSR Automotive Swan-neck rear wing for Mercedes-Benz CLE 236 ConvertibleSwan-neck rear wing suitable for Mercedes-Benz CLE 236 from 2024-Suitable for the convertible model/body style(s)Swan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for an especially sporty rear appearanceWith ABE (general type approval) / TTG (component type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent working properties and guarantees professional results. CSR Automotive GRP products are ideally suited for repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für Audi A4 / S4 B9 (Typ 8W) Limousine SHF044 Image 1

Swan-neck rear wing with ABE documentation for Audi A4 / S4 B9 (Type 8W) Saloon SHF044

CSR Automotive swan-neck rear wing for Audi A4 / S4 B9 (Type 8W) saloonswan-neck rear wing suitable for Audi A4 / S4 B9 (Type 8W), model years 2015-2024suitable for the saloon model/body style variant(s)swan-neck rear wing set comprising wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fitment, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure precise fitment and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle, fitting materials includedswan-neck rear wing made from high-quality GRPAdvantages of this composite material: extremely high flexibility combined with high stability, splinter resistance and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to excellent cutting and bonding properties.consistent surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible

From €1,199.00
Model
Details
Schwanenhals Heckflügel mit ABE für BMW 1er / M1 E82 Coupe SHF043 Image 1

Swan-neck rear wing with ABE documentation for BMW 1 Series / M1 E82 Coupe SHF043

CSR Automotive swan-neck rear wing for BMW 1 Series / M1 E82 Coupeswan-neck rear wing suitable for BMW 1 Series / M1 E82 year of manufacture 2004-2013suitable for the model/body variant(s) Coupeswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear viewwith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure precise fitting and optimum aerodynamics.fitted by bolting to the rear of the vehicle, fitting materials includedswan-neck rear wing is manufactured from high-quality GRPthe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface offers excellent working properties and guarantees professional results. GRP products from CSR Automotive are exceptionally well suited to repair work and further conversion work thanks to their excellent cutting and bonding properties.uniform surface structure allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)includes fitting instructionsmaterial is flexible

From €1,099.00
Model
Details

All Products – High-Quality Tuning Parts from CSR-Automotive for Your Vehicle

On this page, you will find an extensive selection of tuning parts from CSR-Automotive for all vehicle models. Whether front spoilers, side skirts, rear spoilers, or diffusers – the products are characterised by excellent fit, innovative material quality, and precise craftsmanship. CSR-Automotive is known as a leading manufacturer of aerodynamic vehicle attachments in Germany and Europe and offers you exclusively parts with general operating permit (abe) or part type approval (ttg). This means for you: No tedious registration of the components, but maximum safety and legal security in road traffic.

Diverse Product Range for Individual Vehicle Tuning

The variety of tuning parts from CSR-Automotive leaves nothing to be desired. Starting with aerodynamically optimised front spoilers and spoiler lips that not only improve the appearance but also increase driving stability, up to side skirts for a striking and dynamic look. With the sill elements, the vehicle appears significantly sportier, while at the same time the downforce is improved.

In addition to the classic components, you will also find special products here such as swan neck rear wings, rear window spoilers, and diffusers, which visually and aerodynamically enhance the rear. Race flaps and race flics complement the range and are particularly interesting for sporty drivers who value maximum performance and an aggressive look.

Quality and Fit from German Production

CSR-Automotive tuning parts are developed in Germany using the latest 3D scanning technology to ensure a perfect fit for your vehicle model. This eliminates elaborate rework, and the assembly is extremely straightforward. Whether air intake covers, side blades, or roof fins – each part seamlessly integrates into the bodywork and enhances the individual character of your vehicle.

The materials and surfaces are optimised for various applications and available in several versions: from glossy black to glossy and matt carbon look as well as paint-friendly variants or the structured black matt surface. This gives you the freedom to tailor the finish exactly to your preferences and the style of your vehicle.

Safety and Legal Security through ABE and TTG

A central advantage of CSR-Automotive tuning parts for all products is the valid general operating permit (abe) or part type approval (ttg). This means that you tin legally use the tuning parts in road traffic without having to have them registered additionally. During a vehicle inspection, carrying the corresponding documents is sufficient to prove the legality of the installed components.

This regulation offers you additional convenience and prevents unnecessary bureaucratic effort. You tin visually and technically upgrade your vehicle with peace of mind – whether through front spoilers, rear spoilers, rear diffusers, or other model-specific attachments.

Vehicle Individualisation Made Easy with Bodykits and Wings

With the complete bodykits from CSR-Automotive, your vehicle becomes a real eye-catcher. The model-specific kits allow for a comprehensive change of the vehicle contours and create a sporty and dynamic line from front to back. Wings provide a more striking appearance and improve the track width, which additionally has a positive effect on driving characteristics.

Whether you prefer a subtle visual upgrade or a radical redesign – the wide product range allows you to customise your vehicle individually while optimising aerodynamics at the same time. From the front section to the rear, all components are harmoniously coordinated to ensure a coherent overall appearance.

Practical and Stylish Enhancements – Air Intake Covers, Side Blades, and Roof Fins

Smaller attachments, such as air intake covers or side blades, round off the appearance and provide an even sportier impression. These components are not only visually attractive but tin also improve airflow, which positively affects the cooling and aerodynamics of the vehicle.

Roof fins, on the other hand, set distinctive accents on the upper area of the vehicle. They not only support aerodynamics but also give your vehicle a unique silhouette that clearly stands out from the series. All these products are carefully matched to the respective vehicle specifications and integrate perfectly into the overall concept of vehicle refinement.

Easy Installation and Durability of the Tuning Parts

The installation of CSR-Automotive tuning parts is uncomplicated and time-saving thanks to thoughtful design and precision manufacturing. Many parts tin be attached without major bodywork or special tools. This also enables ambitious hobby mechanics to customise their vehicle themselves.

Furthermore, the high material quality impresses with resistance to weather influences, stone chipping, and other stresses encountered in road traffic. Thus, front spoilers, side skirts, diffusers, and other attachments remain visually and functionally at a high level for a long time.

Conclusion: All Products from CSR-Automotive for Stylish and Safe Vehicle Tuning

The category “All Products” includes a comprehensive range of high-quality tuning parts from CSR-Automotive, specially developed for individual vehicle models. Whether front spoilers, rear spoilers, side skirts, or air intake covers – each product helps to enhance the vehicle not only visually but also improves the driving characteristics.

The combination of German manufacturing, precise fit, diverse surface options, and legal security through ABE or TTG makes CSR-Automotive tuning parts the first choice for all who value quality, design, and safety. Discover the complete product range now and give your vehicle the sporty appearance it deserves.

All Products – High-Quality Tuning Parts from CSR-Automotive for Your Vehicle

On this page, you will find an extensive selection of tuning parts from CSR-Automotive for all vehicle models. Whether front spoilers, side skirts, rear spoilers, or diffusers – the products are characterised by excellent fit, innovative material quality, and precise craftsmanship. CSR-Automotive is known as a leading manufacturer of aerodynamic vehicle attachments in Germany and Europe and offers you exclusively parts with general operating permit (abe) or part type approval (ttg). This means for you: No tedious registration of the components, but maximum safety and legal security in road traffic.

Diverse Product Range for Individual Vehicle Tuning

The variety of tuning parts from CSR-Automotive leaves nothing to be desired. Starting with aerodynamically optimised front spoilers and spoiler lips that not only improve the appearance but also increase driving stability, up to side skirts for a striking and dynamic look. With the sill elements, the vehicle appears significantly sportier, while at the same time the downforce is improved.

In addition to the classic components, you will also find special products here such as swan neck rear wings, rear window spoilers, and diffusers, which visually and aerodynamically enhance the rear. Race flaps and race flics complement the range and are particularly interesting for sporty drivers who value maximum performance and an aggressive look.

Quality and Fit from German Production

CSR-Automotive tuning parts are developed in Germany using the latest 3D scanning technology to ensure a perfect fit for your vehicle model. This eliminates elaborate rework, and the assembly is extremely straightforward. Whether air intake covers, side blades, or roof fins – each part seamlessly integrates into the bodywork and enhances the individual character of your vehicle.

The materials and surfaces are optimised for various applications and available in several versions: from glossy black to glossy and matt carbon look as well as paint-friendly variants or the structured black matt surface. This gives you the freedom to tailor the finish exactly to your preferences and the style of your vehicle.

Safety and Legal Security through ABE and TTG

A central advantage of CSR-Automotive tuning parts for all products is the valid general operating permit (abe) or part type approval (ttg). This means that you tin legally use the tuning parts in road traffic without having to have them registered additionally. During a vehicle inspection, carrying the corresponding documents is sufficient to prove the legality of the installed components.

This regulation offers you additional convenience and prevents unnecessary bureaucratic effort. You tin visually and technically upgrade your vehicle with peace of mind – whether through front spoilers, rear spoilers, rear diffusers, or other model-specific attachments.

Vehicle Individualisation Made Easy with Bodykits and Wings

With the complete bodykits from CSR-Automotive, your vehicle becomes a real eye-catcher. The model-specific kits allow for a comprehensive change of the vehicle contours and create a sporty and dynamic line from front to back. Wings provide a more striking appearance and improve the track width, which additionally has a positive effect on driving characteristics.

Whether you prefer a subtle visual upgrade or a radical redesign – the wide product range allows you to customise your vehicle individually while optimising aerodynamics at the same time. From the front section to the rear, all components are harmoniously coordinated to ensure a coherent overall appearance.

Practical and Stylish Enhancements – Air Intake Covers, Side Blades, and Roof Fins

Smaller attachments, such as air intake covers or side blades, round off the appearance and provide an even sportier impression. These components are not only visually attractive but tin also improve airflow, which positively affects the cooling and aerodynamics of the vehicle.

Roof fins, on the other hand, set distinctive accents on the upper area of the vehicle. They not only support aerodynamics but also give your vehicle a unique silhouette that clearly stands out from the series. All these products are carefully matched to the respective vehicle specifications and integrate perfectly into the overall concept of vehicle refinement.

Easy Installation and Durability of the Tuning Parts

The installation of CSR-Automotive tuning parts is uncomplicated and time-saving thanks to thoughtful design and precision manufacturing. Many parts tin be attached without major bodywork or special tools. This also enables ambitious hobby mechanics to customise their vehicle themselves.

Furthermore, the high material quality impresses with resistance to weather influences, stone chipping, and other stresses encountered in road traffic. Thus, front spoilers, side skirts, diffusers, and other attachments remain visually and functionally at a high level for a long time.

Conclusion: All Products from CSR-Automotive for Stylish and Safe Vehicle Tuning

The category “All Products” includes a comprehensive range of high-quality tuning parts from CSR-Automotive, specially developed for individual vehicle models. Whether front spoilers, rear spoilers, side skirts, or air intake covers – each product helps to enhance the vehicle not only visually but also improves the driving characteristics.

The combination of German manufacturing, precise fit, diverse surface options, and legal security through ABE or TTG makes CSR-Automotive tuning parts the first choice for all who value quality, design, and safety. Discover the complete product range now and give your vehicle the sporty appearance it deserves.

This website uses cookies to ensure the best experience possible. More information...