Diffuser | rear valance with ABE for Audi A6 C8 (type 4A/F2) HA519

CSR Automotive swan-neck rear wing for Audi A6 / S6 C8 (Type 4A/F2) saloonSwan-neck rear wing suitable for Audi A6 / S6 C8 (Type 4A/F2), model years 2018-2025Suitable for the saloon model/body variant(s)Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear-end lookSupplied with ABE (general operating permit) / TTG (part type approval), so no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure accurate fitment and optimal aerodynamics.Fitted by bolting to the rear of the vehicle, mounting hardware includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are also ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR-Automotive Frontspoiler | Cup spoiler lip for Audi A6 / S6 C8 (Type 4A) with ABE (registration-free!)Cup spoiler lip suitable for Audi A6 / S6 C8 (Type 4A) model year 2018- (including facelift)Suitable for the model/body variant(s) Saloon and Avant (S-Line and S6)Sporty appearance and integrated underrun protection for your original bumperIs riveted to the original bumper; mounting material is includedWith ABE (general operating permit) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality material ABSIncludes mounting hardware, if necessaryIncludes installation instructionsMaterial is flexible

CSR-Automotive Front Spoiler | Cup Spoiler Lip for Audi A6 C8 (Type 4K/F2) with ABE (no registration required!)Cup spoiler lip suitable for Audi A6 C8 (Type 4K/F2) model year 2018-2023Compatible with the model/body variant(s) Allroad AvantSporty look and integrated underbody protection for your original bumperIs riveted to the original bumper, mounting hardware is includedWith ABE (general operating permit) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Razor Edge for Audi A6 C8 (Type 4K/F2) Saloon with ABE (registration-free!)Rear spoiler suitable for Audi A6 C8 (Type 4K/F2) model year 2018-fits the model/body variant(s) saloonalso compatible with S6With ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe mounting with the 3M™ Adhesive Tape PT 1100 is done in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective liner from the pre-fabricated and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideal for mounting rigid appendages where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are efficiently dissipated, resulting in very durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without paint damageThe rear lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Rear Window Spoiler for Audi A6 C8 (Type 4K/F2) Saloon with ABE/TTGRear window spoiler suitable for Audi A6 C8 (Type 4K/F2) model year 2018-Compatible with the model/body variant(s) SaloonWith ABE (general operating permit) / TTG (Parts type approval) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Rear window spoiler is made of high-quality material ABSIncludes installation instructionsMaterial is flexible

CSR-Automotive Front Spoiler | Cup Spoiler Lip for Audi A6 C8 (Type 4K/F2) with ABE (No registration required!)Cup Spoiler Lip suitable for Audi A6 C8 (Type 4K/F2) model year 2018-2023Compatible with all model/body variants except Allroad, S-LineSporty appearance and integrated underbody protection for your original bumperIs riveted to the original bumper, mounting hardware includedWith ABE (general operating permit) and thus no registration requiredGood fit, as this is not a universal part but specially developed for this vehicle type!Cup Spoiler Lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive rear spoiler | rear wing | rear lip | edge for Audi A6 C8 (Type 4K/F2) with ABE (no registration required!)Rear spoiler suitable for Audi A6 C8 (Type 4K/F2) model year 2018-suitable for the model/body variant(s) Avantnot suitable for RSWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Klebeband PT 1100 with extremely high initial tack and high adhesionThe mounting with the 3M™ Klebeband PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective strip from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Klebeband PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack that was specially developed for the automotive sector and is ideally suited for attaching rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of the PT1100, stresses in the adhesive joint are excellently dissipated, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear lip is made of high-quality material ABSIncludes mounting instructionsMaterial is flexible

CSR-Automotive Front spoiler | Cup spoiler lip for Audi A6 S-Line / S6 C8 (Type 4K/F2) with ABE (registration-free!)Cup spoiler lip suitable for Audi A6 C8 (Type 4K/F2) Year 2018-2023suitable for all model/body variants with S-Line exteriorAudi S6 C8 (Type 4K/F2) Year 2019-2023suitable for all model/body variantsSporty look and integrated underbody protection for your original bumperWill be riveted to the original bumper, mounting hardware includedWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Load Lip Protection / Load Lip Cover for Audi A6 C8 (Type 4K/F2) glossy blackLoad lip protection suitable for Audi A6 C8 (Type 4K/F2) year 2018-Compatible with the model/body variant(s) AvantScratch protection for your load lipNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe installation with the 3M™ tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective liner from the preconfigured and pre-installed tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetic visible edge is desired.PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded.Due to the unique viscoelastic property of PT1100, stresses in the adhesive bond are effectively dissipated, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe load lip protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after mounting)Due to the glossy black surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible

CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Trailing Edge for Audi A6 C8 (Type 4K/F2) Avant with ABE (no registration required!)Rear spoiler suitable for Audi A6 C8 (Type 4K/F2) Avant, model year from 11/2018–Fits all model/body variant(s) except RS6 With ABE (general operating permit) and thus not requiring registrationGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ tape PT 1100 is performed in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective liner from the pre-fabricated and pre-mounted tapeStick on, done!3M™ Acrylic Plus tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that has been specifically developed for the automotive sector and is ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired.High durability also in car wash tunnels, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear lip is made of high-quality material ABSIncludes mounting instructionsMaterial is flexible