Expert report follow-up delivery GU001

CSR-Automotive Heckspoiler | Heckflügel | Hecklippe | Abrisskante für Seat Ibiza 5 (6F) mit ABE (Eintragungsfrei!)Heckspoiler passend für Seat Ibiza 5 (6F) Baujahr 2017-passend für alle Modell-/Karosserievariantennur passend in Kombination mit CSR-HF206Seitenteil-Set (2-teilig)Mit ABE (allgemeine Betriebserlaubnis) und somit eintragungsfreiGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels 3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackHeckflügel ist aus hochwertigen Material ABS gefertigtInklusive Montagezubehör, sofern notwendigInklusive MontageanleitungMaterial ist flexibel

CSR Automotive swan-neck rear wing for Hyundai Genesis (BK/BK2) Coupe with ABE documentation (no registration required in Germany!)Swan-neck rear wing suitable for Hyundai Genesis (BK/BK2), model year 2008-2015Suitable for the Coupe model/body variant(s)For vehicles with a Hyundai OEM rear spoiler, this must be removed and the third brake light behind the rear window activated. The holes from the OEM rear spoiler can be used for fitting.Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear appearanceWith ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle, fitting material included in the scope of deliveryThe swan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from GRP by CSR Automotive are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Consistent surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for BMW 6 Series / M6 (E63/E64) with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 6 Series / M6 (E63/E64), model year 2007-2010 (facelift)Suitable for all model/body variantsSwan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitting is carried out by bolting to the rear of the vehicle; fitting materials are includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splitting, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for BMW 6 Series / M6 (E63/E64) with ABE documentation (no registration required in Germany!)Swan-neck rear wing suitable for BMW 6 Series / M6 (E63/E64), year of manufacture 2003-2007 (pre-facelift)suitable for all model/body variantsswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting material includedThe swan-neck rear wing is made from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair work and further conversions thanks to excellent cutting and bonding properties.Consistent surface structure allows painting without major preparation work (wing blade is unpainted - brackets are already painted black)Installation instructions includedMaterial is flexible

CSR Automotive Swan-neck rear wing for Ford Mustang MK7 GT with ABE (no registration required!)Swan-neck rear wing suitable for Ford Mustang MK7, year from 2023-suitable for the GT model/body variant(s)Swan-neck rear wing set consisting of wing panel and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval) and therefore no registration requiredGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is fitted from the factory with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, shatter resistance, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work and guarantees professional results. Products made from GRP by CSR Automotive are ideally suited for repair work and further conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparation work (wing panel is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR-Automotive swan-neck rear wing for Audi A5 / S5 B10 (type FU) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Audi A5 / S5 B10 (type FU), model year 2024-Suitable for the saloon body style(s)On the S5, the original lip must be removedSwan-neck rear wing set consisting of wing element and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (parts type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motor racing. The distinctive black surface is easy to work with and guarantees professional results. CSR-Automotive GRP products are ideally suited to repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing element is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for Cupra Tavascan with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Cupra Tavascan model year 2023-Suitable for all model/body variantsSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewSupplied with ABE (general operating approval) / TTG (type approval for parts) and therefore no registration requiredGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure an accurate fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting material is includedThe swan-neck rear wing is made from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The distinctive black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and other modification work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for BMW 2 Series F44 Gran Coupé with ABE (no registration required in Germany!)Swan-neck rear wing suitable for BMW 2 Series F44, model years 2020-2024Suitable for the Gran Coupé model/body style(s)Swan-neck rear wing kit comprising wing blade and vehicle-specific bracketsStriking motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (component type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure precise fitting and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are ideally suited to repair and further conversion work thanks to excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for Ford Mustang MK6 Coupé with ABE (no registration required in Germany!)swan-neck rear wing suitable for Ford Mustang MK6 year of manufacture 2014-2023suitable for the model/body variant(s) Coupéswan-neck rear wing set consisting of wing blade and vehicle-specific bracketsdistinctive motorsport design for a particularly sporty rear appearancewith ABE (general operating permit) / TTG (part type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting materials are included in the scope of deliveryswan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited for repair and further conversion work thanks to excellent cutting and bonding properties.Uniform surface structure allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Installation instructions includedMaterial is flexible

CSR-Automotive Swan-neck rear wing for Mercedes-Benz CLA (C117) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Mercedes-Benz CLA (C117), model years 2013-2019Suitable for the saloon body styleSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) documentation, therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, impact resistance, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from GRP by CSR-Automotive are ideal for repair and other conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for Mercedes-Benz C-Class (C205) Coupé with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Mercedes-Benz C-Class (C205), model years 2014-2023Suitable for the Coupé model/body style variant(s)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but has been specifically developed for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing in order to ensure a precise fit and optimum aerodynamics.Installation is carried out by bolting to the rear of the vehicle; fitting hardware is includedSwan-neck rear wing is manufactured from high-quality GRPThe benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair work and other modification work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR Automotive swan-neck rear wing for Skoda Octavia 3 (Typ 5E) saloon with ABE (no registration required in Germany!)Swan-neck rear wing suitable for Skoda Octavia 3 (Typ 5E), model years 2012-2020Suitable for the saloon body style(s) (including RS)Swan-neck rear wing set consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear endWith ABE (general operating permit) / TTG (part type approval), therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Important fitting note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be fully removed before fitting the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Fitting is carried out by bolting to the rear of the vehicle, fitting material includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splitting and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair work and further conversion projects thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without major preparatory work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible