Front end for Audi A6 C5 FA131

CSR Automotive swan-neck rear wing for Audi A6 / S6 C8 (Type 4A/F2) saloonSwan-neck rear wing suitable for Audi A6 / S6 C8 (Type 4A/F2), model years 2018-2025Suitable for the saloon model/body variant(s)Swan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear-end lookSupplied with ABE (general operating permit) / TTG (part type approval), so no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure accurate fitment and optimal aerodynamics.Fitted by bolting to the rear of the vehicle, mounting hardware includedThe swan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: Extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. GRP products from CSR Automotive are also ideally suited to repair and further conversion work thanks to their excellent cutting and bonding properties.Even surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Includes fitting instructionsMaterial is flexible

CSR-Automotive diffuser | rear valance for Audi A6 C9Rear valance suitable for Audi A6 C9, model year 2025-Suitable for the saloon and Avant model/body variants (base model)Not suitable for S-Line, edition one, S6 and RS6Technical documentation in preparation (will be sent on afterwards as soon as available). On request, we tin supply this item in advance together with material documentation (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specially developed for this vehicle type!Rear valance manufactured from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible

CSR-Automotive diffuser | rear valance for Audi A6 C8 (type 4A/F2) with ABE/TTGRear valance suitable for Audi A6 C8 (type 4A/F2), model year 2023-2025suitable for the saloon and Avant body styles (facelift)not suitable for S-LineSupplied with ABE (general operating permit) / TTG (type approval), so no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!The rear valance is made from high-quality ABSIncludes fitting accessories, if requiredIncludes fitting instructionsMaterial is flexible

CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi A6 C9 AvantRear spoiler suitable for Audi A6 C9, model year 2025-suitable for the model/body variant(s) Avant (base model, edition one, S-Line and S6)Certificate in preparation (will be sent later as soon as available). If requested, we tin supply this item in advance together with a material report (this is not type approval documentation within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an aesthetically neat visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable joints.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible

CSR Automotive rear spoiler | rear wing | rear lip | trailing edge for Audi A6 C9 AvantRear spoiler suitable for Audi A6 C9 from model year 2025-Suitable for the Avant model/body style variant(s)Rear wing below the rear windowReport in preparation (will be sent on afterwards as soon as available). On request, we tin supply this item in advance together with a material report (this is not a Teilegutachten within the meaning of §19.3 StVZO, only applicable in Germany)Good fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses within the bond line are effectively absorbed, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintRear wing is made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible

CSR Automotive front splitter | front lip for Audi A6 S-Line / S6 C7 (Type 4G) with ABE (no registration required in Germany!)Front splitter suitable for Audi A6 S-Line / S6 C7 (Type 4G), model years 2014-2018 (facelift)Suitable for all model/body variants with S-Line exterior, as well as for S6Sporty appearance and integrated underbody protection for your original bumperRiveted to the original bumper; fitting materials are includedSupplied with ABE documentation, only applicable in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Front splitter made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible

CSR-Automotive Frontspoiler | Cup spoiler lip for Audi A6 / S6 C8 (Type 4A) with ABE (registration-free!)Cup spoiler lip suitable for Audi A6 / S6 C8 (Type 4A) model year 2018- (including facelift)Suitable for the model/body variant(s) Saloon and Avant (S-Line and S6)Sporty appearance and integrated underrun protection for your original bumperIs riveted to the original bumper; mounting material is includedWith ABE (general operating permit) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality material ABSIncludes mounting hardware, if necessaryIncludes installation instructionsMaterial is flexible

CSR-Automotive Front Spoiler | Cup Spoiler Lip for Audi A6 C8 (Type 4K/F2) with ABE (no registration required!)Cup spoiler lip suitable for Audi A6 C8 (Type 4K/F2) model year 2018-2023Compatible with the model/body variant(s) Allroad AvantSporty look and integrated underbody protection for your original bumperIs riveted to the original bumper, mounting hardware is includedWith ABE (general operating permit) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Front bumper / front spoiler lip for Audi A6 4FFront spoiler lip suitable for Audi A6 4F model year 2008-2011suitable for all model-/body variantsnot suitable for S-Line / S / RS6With vehicle-specific parts certificate for installation approval under §19.3 StVZOIncludes mounting accessories, if necessaryIncludes installation instructionsThe front spoiler lip is made from the innovative and high-quality material Fiberflex.The advantages of this novel compositae material: extremely high flexibility while simultaneously high stability, splinter resistance, and non-flammability.A very high manufacturing quality and the low weight even allow use in professional motorsport.The characteristic black surface features good workability and guarantees professional results.Fiberflex products from CSR-Automotive are highly suitable for repair and further modification work thanks to excellent cutting and bonding properties.Even surface texture enables painting without major prep (product is unpainted)Material is flexible

CSR-Automotive front-end kit / front spoiler lip for Audi A6 4FFront spoiler lip suitable for Audi A6 4F model year 2008-2011only fits on S-Line (To be recognised by the number of struts under the bumper: S-Line has three struts, the normal variant four.)With vehicle-specific parts certificate for installation approval under §19.3 StVZOIncl. mounting hardware, if necessaryIncludes mounting instructionsFront spoiler lip is made from the innovative and high-quality material Fiberflex. The advantages of this novel compositae material: extremely high flexibility with simultaneously high stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further modification work thanks to best cutting and bonding properties.Even surface texture enables painting without extensive pre-work (product is unpainted)Material is flexible

CSR-Automotive Diffuser | Rear bumper valance for Audi A6 4FRear bumper valance fits for Audi A6 4FYear 2008-2011Fits the model/body variant(s) saloon and AvantWith expert assessment and thus not requiring registrationIncl. mounting hardware, if necessaryIncludes installation instructionsThe rear bumper valance is made from the innovative and high-quality material Fiberflex. The advantages of this novel compositae material: extremely high flexibility while maintaining high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is distinguished by good workability and guarantees professional results. Fiberflex products from CSR-Automotive are exceptionally well suited for repair and further modification work thanks to best cutting and bonding properties.Even surface texture enables painting without major preliminary work (product is unpainted)Material is flexibleThe items included in this offer are only the mounting parts highlighted in the image "Delivery contents".

CSR Automotive front bumper / front spoiler for Audi A6 C5 type 4B faceliftFront bumper suitable for Audi A6 C5 type 4B facelift Model year 2001-2004for saloon / estate body style variant(s) (saloon / Avant), also with headlight washer systemdoes not fit the A6 4.2 quattro, S6 and RS6 modelsgrille is not included. An Audi A6 Single Frame grille is required.bonnet must be modified. We offer a bonnet for easy replacement with the original bonnet (see below)fog light brackets are not included.fog lights are not included.daytime running light brackets are not included.daytime running lights are not included. These are required in addition to the daytime running light brackets.front braces are not included. These tin be fitted in the air intake.´Supplied with model-specific Teilegutachten documentation, only applicable in Germany for installation approval in accordance with §19.3 StVZOIncl. mesh grilleIncl. fitting accessories, where necessaryIncludes fitting instructionsFront bumper is manufactured from the innovative and high-quality Fiberflex material. The advantages of this new compositae material: extremely high flexibility combined with great stability, impact resistance and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motorsport. The distinctive black surface is easy to work and guarantees professional results. Fiberflex products from CSR Automotive are ideally suited to repair and other modification work thanks to their excellent cutting and bonding properties.Consistent surface texture allows painting without major preparation work (product is unpainted)Material is flexible