Headlight eyelids for VW Golf 7 (Type AU) SB191-G

CSR Automotive swan-neck rear wing for VW Golf 7 with ABE (no registration required!)Swan-neck rear wing suitable for VW Golf 7, model years 2012-2021Suitable for the GTI, GTD, GTE, R, R-Line and e-Golf model/body variantsNot suitable for ClubsportSwan-neck rear wing set consisting of wing blade and vehicle-specific bracketsStriking motorsport design for a particularly sporty rear viewWith ABE (general operating permit) / TTG (type approval) and therefore no registration requiredGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important fitting note: If your vehicle is factory-fitted with an original rear spoiler lip, it must be fully removed before installing the swan-neck rear wing to ensure a precise fit and optimum aerodynamics.Fitted by bolting to the rear of the vehicle, fitting materials includedSwan-neck rear wing is manufactured from high-quality GRPThe advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering and non-flammability. Very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. CSR Automotive GRP products are ideally suited to repair and other conversion work thanks to their excellent cutting and bonding properties.Uniform surface texture allows painting without extensive preparation work (wing blade is unpainted - brackets are already painted black)Including fitting instructionsMaterial is flexible

CSR-Automotive roof fins for VW Golf 7 (Type AU) with ABE/TTGRoof fin set (left and right) suitable for VW Golf 7 (Type AU), model years 2012-2021Suitable for the model/body style variant(s) hatchback (all)Not suitable for VariantSupplied with ABE (general operating permit) / TTG (type approval for parts), therefore no registration required in GermanyGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with the 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRoof fins are made from high-quality ABSIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible

CSR-Automotive Diffuser | Rear bumper extension for VW Golf 7Rear bumper extension suitable for VW Golf 7Year of manufacture 08/2012-03/2017Suitable for models with only one exhaust pipe on the driver's sideNot suitable for R-Line / GTI / RWith expert assessment and thus no registration requiredIncludes mounting hardware, if necessaryIncludes installation instructionsRear bumper extension is made from the innovative and high-quality material Fiberflex. The advantages of this novel compositae material: extremely high flexibility while at the same time great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are well-suited thanks to the best cutting and bonding properties for repair and further modification work.Uniform surface texture enables painting without major pre-work (the product is unpainted)Material is flexibleThe items of this offer are only the mounting parts highlighted in the image "Delivery contents".

CSR-Automotive Side Skirts for VW Golf 7Side skirt set (2 pieces) compatible with VW Golf 7 Model year from 08/2012Suitable for all model/body variantsWith expert assessment and thus registration-freeIncl. mounting hardware, if necessaryIncludes mounting instructionsSide skirts are made from the innovative and high-quality material Fiberflex. The advantages of this novel compositae material: extremely high flexibility together with great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is distinguished by good workability and guarantees professional results. Fiberflex products from CSR-Automotive are particularly well suited for repair and further modification work thanks to excellent cutting and bonding properties.Uniform surface structure enables painting without major pre-work (the product is unpainted)Material is flexible

CSR-Automotive rear silencer / sport exhaust for VW Golf 7Rear silencer in GTI-look fit for VW Golf 7for the model-/body variant(s) hatchbackin the engine variants 1.0 TSI 63/81/85kW1.2 TSI 63/77kW1.4 TSI 90/92/103/110kW1.5 TSI 96/110kW2.0 TSI 162/169/180/195kW1.6 TDI 66/77/81/85kW2.0 TDI 105/110/135kWcompatible with CSR-HA266High-performance exhaust system with two tailpipesAttention: The rear silencer fits for the original exhaust pipe with an outer diameter of 65mmfor different pipe diameter use reducers: CSR-ZB179 (outer diameter original exhaust pipe 50mm), or CSR-ZB180 (outer diameter original exhaust pipe 55mm)Rich sound and authentic race lookMade of aluminium / steelWith EC approval and thus no registration required and legally permissible!Includes mounting instructions

CSR-Automotive Side Skirts for VW Golf 7 GTI TCR with ABE/TTGSide skirt set (2 pieces) suitable for VW Golf 7 model year 2019-suitable for the model-/body variant GTI TCRWith ABE (general operating permit) / TTG (type approval) and thus no registration requiredIncl. mounting hardware, if necessaryGood fit, as it is not a universal part but specifically developed for this vehicle type!Side skirts are made from high-quality material ABSIncludes mounting instructionsMaterial is flexible

CSR-Automotive Front Spoiler | Cup Spoiler Lip for VW Golf 7 with ABE (no registration required!)Cup spoiler lip suitable for VW Golf 7 model year 2017- (facelift)suitable for all model/body variantsnot compatible with GTI, GTD, GTE, R, R-Line and e-GolfSporty look and integrated underride protection for your original bumperWill be riveted to the original bumper, mounting hardware includedWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality ABS materialIncludes mounting instructionsThe material is flexible

CSR-Automotive Front Apron / Front Spoiler Lip for VW Golf 7Front bumper lip compatible with VW Golf 7 model year 04/2017- (facelift)compatible with all model/body variants of the base versionnot compatible with GTI, GTI TCR, GTD, R and R-LineThe item is two-pieceWith vehicle-specific parts certificate for installation approval under §19.3 StVZOGood fit, as this is not a universal part but specifically designed for this vehicle type!The front spoiler lip is made of high-quality ABS materialIncludes mounting instructionsIncludes mounting hardwareMaterial is flexible

CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Tear-off Edge for VW Golf 7 with ABE (Registration-free!)Rear spoiler suitable for VW Golf 7 model year 01/2016-02/2017suitable for the model/body variant(s) GTI ClubsportVW Golf 7 model year 2017-2019suitable for the model/body variant(s) of the Base version in combination with CSR-HF621not suitable for R / R-Line / GTI / GTD / GTE / VariantVW Golf 7 model year 2019-2019suitable for the model/body variant(s) R / R-Line / GTI / GTD / GTE in combination with CSR-HF623not suitable for VariantWith ABE (general operating permit) and thus registration-freeGood fit, as it is not a universal part but specially developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate adhesion and high bonding strengthThe installation with the 3M™ adhesive tape PT 1100 is done in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate bonding power that was developed especially for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Tear-off Edge for VW Golf 7 (Type AU) with ABE (no registration required!)Rear spoiler suitable for VW Golf 7 (Type AU) model year 2012-2021suitable for all model/body variant(s) of the base versionnot suitable for GTI, GTD, GTE, R and R-LineRear wing in Clubsport lookWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate bonding strength and high tackThe installation with the 3M™ Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning wipePeel the protective strip from the pre-cut and pre-assembled tapeAttach, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate bonding strength that was specifically developed for the automotive sector and is ideal for mounting rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and moisture, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear lip is made from high-quality ABS materialIncludes mounting instructionsMaterial is flexible

CSR-Automotive Diffuser | Rear bumper diffuser for VW Golf 7 with ABE/TTGRear bumper diffuser suitable for VW Golf 7 model year 2013-2017 (pre-facelift)suitable for the model/body variant(s): Variantnot suitable for R and R-Line2-piece side coversWith ABE (general operating permit) / TTG (type-approval) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Rear bumper diffuser is made from high-quality ABS materialIncludes mounting instructionsThe material is flexible

CSR-Automotive Front spoiler | Cup spoiler lip for VW Golf 7 (Type AU) with ABE (Registration-free!)Cup spoiler lip suitable for VW Golf 7 (Type AU) model year 2017-2021 (facelift)suitable for the model-/body variant(s) Rcombinable with the front panels CSR-CSL636Sporty look and integrated underrun protection for your original bumperIs riveted to the original bumper, mounting material includedWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible