Order Loading edge protection online
Ladekantenschutz für BMW 5er G31 M-Paket LKS001
CSR-Automotive Ladekantenschutz / Ladekantenabdeckung für BMW 5er G31 Ladekantenschutz passend für BMW 5er G31 Baujahr (LCI) 2020-passend für die Modell-/Karosserievariante(n) Touring mit M-PaketKratzschutz für Ihre LadekanteEintragungsfrei, da keine bauliche /aerodynamische Veränderung am FahrzeugGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackLadekantenschutz ist aus hochwertigem Material ABS gefertigtInklusive MontageanleitungMaterial ist flexibel
Boot sill protector for Mercedes-Benz C-Class (S205) estate LKS058
CSR-Automotive boot sill protector / boot sill cover for Mercedes-Benz C-Class (S205) Estateboot sill protector suitable for Mercedes-Benz C-Class (S205) model year 2014-2018suitable for the model/body variant(s) Estatescratch protection for your boot sillno registration required in Germany, as there is no structural/aerodynamic modification to the vehicleGood fit, as it is not a universal part but specially developed for this vehicle type!Clean and simple attachment using3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and high bonding strengthFitting with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for securing rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers excellent adhesion to a wide range of automotive surfaces, good internal strength, outstanding long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are absorbed exceptionally well, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkboot sill protector is made from high-quality ABSIncludes fitting instructionsMaterial is flexible
Boot sill protector for VW T6 / T6.1 LKS033
CSR-Automotive boot sill protector / boot sill cover for VW T6 / T6.1boot sill protector suitable for VW T6 / T6.1 model year 2015-suitable for the model/body variant(s) Transporter, Multivan, and Caravelle (with tailgate)scratch protection for your boot sillNo registration required in Germany, as there is no structural / aerodynamic modification to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkboot sill protector is made from high-quality ABS materialIncludes fitting instructionsMaterial is flexible
Boot sill protector for Ford Tourneo Custom (2nd gen) / Transit Custom (2nd gen) LKS066-G
CSR-Automotive boot sill protector / boot sill cover for Ford Tourneo Custom (2nd gen) / Transit Custom (2nd gen) gloss blackboot sill protector suitable for Ford Tourneo Custom (2nd gen) / Transit Custom (2nd gen), year of manufacture 2023-suitable for all model/body variantsscratch protection for your boot sillNo registration required in Germany, as there is no structural / aerodynamic change to the vehicleGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and straightforward fixing using 3M™ Acrylic Plus tape PT 1100 with extremely high initial grab and strong adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-configured and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, specially developed for the automotive sector and ideal for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively reduced, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkBoot sill protector is manufactured from high-quality ABS and finished with a gloss black surface - better than painted! (Please note: remove the protective film after fitting)With the gloss black surface, no paint finish is visually necessaryIncluding fitting accessories, where necessaryIncluding fitting instructionsMaterial is flexible
Boot sill protector for VW Tayron LKS064-G
CSR Automotive boot sill protector / boot sill cover for VW Tayron, gloss blackboot sill protector suitable for VW Tayron, model year 2024-suitable for all model/body variants incl. R-Linescratch protection for your boot sillNo registration required in Germany, as there is no structural / aerodynamic modification to the vehicleGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple fastening using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the supplied 3M cleaning clothRemove the protective strip from the pre-prepared and pre-fitted tapeApply and done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fixing rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively reduced, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to shock and weatheringEasy removal without damage to the paintworkThe boot sill protector is made from high-quality ABS and features a gloss black surface - better than painted! (Important: remove the protective film after fitting)Due to the gloss black surface, no painting is visually necessaryIncluding fitting accessories, where necessaryIncluding fitting instructionsMaterial is flexible
Boot sill protector for Audi A5 / S5 B10 (type FU) LKS065-G
CSR Automotive boot sill protector / boot sill cover for Audi A5 / S5 B10 (Type FU) gloss blackBoot sill protector suitable for Audi A5 / S5 B10 (Type FU), model year 2024-Suitable for the Avant and saloon model/body style(s)Scratch protection for your boot sillNo registration required in Germany, as there is no structural / aerodynamic modification to the vehicleGood fit, as this is not a universal part but has been developed specifically for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus adhesive tape PT 1100 with extremely high initial tack and strong adhesive strengthFitting with 3M™ PT 1100 tape is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-fitted adhesive tapeStick it on, done!3M™ Acrylic Plus adhesive tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bonded joint are effectively reduced, resulting in extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high resistance to impact and weatheringEasy removal without damage to the paintworkThe boot sill protector is made from high-quality ABS material and has a gloss black surface - better than painted! (Please note: remove the protective film after fitting)Thanks to the gloss black surface, no paint finish is visually necessaryIncludes fitting accessories, where necessaryIncludes fitting instructionsMaterial is flexible
Loading edge protection for Hyundai i10 (3rd Gen) LKS046-G
CSR-Automotive Loading Edge Protection / Loading Edge Cover for Hyundai i10 (3rd Gen) Black GlossyLoading edge protection suitable for Hyundai i10 (3rd Gen) year of manufacture 2019-fits for all model / body variantsScratch protection for your loading edgeNo registration required, as there are no structural / aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high immediate bonding and high adhesionThe installation with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective strip from the pre-cut and pre-mounted tapeAttach, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate bonding strength that was specially developed for the automotive sector and is ideally suited for fastening rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, the stresses in the adhesive seam are very well dissipated, resulting in extremely durable joints.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality material ABS and features a black high-gloss surface - better than painted! (Note: remove the protective film after installation)Due to the black high-gloss surface, visually no painting is necessaryIncludes mounting hardware, if necessaryIncludes installation instructionsMaterial is flexible
Loading edge protector for Opel Astra L hatchback LKS059-G
CSR-Automotive loading lip protector / loading edge cover for Opel Astra L black glossLoading edge protection suitable for Opel Astra L year 2022-Suitable for the model-/body variant(s) hatchback (5-door)Not suitable for Sports TourerScratch protection for your loading edgeNo registration required, as there are no structural / aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically designed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high adhesionThe installation with the 3M™ Adhesive Tape PT 1100 takes place in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-assembled tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideal for fastening rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintLoading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Due to the black glossy surface, visually no painting is necessaryIncludes mounting instructionsMaterial is flexible
Boot edge protector for Skoda Kamiq LKS057-G
CSR-Automotive loading edge protection / loading edge cover for Skoda Kamiq, black glossyLoading edge protection suitable for Skoda Kamiq model year 2019-Suitable for all model and body variantsScratch protection for your loading edgeRegistration-free, as there are no structural/aerodynamic changes to the vehicleGood fit since this is not a universal part but specifically designed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 occurs in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective backing from the pre-cut and pre-assembled tapeAdhere, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible seam is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, so that extremely durable connections are formed.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Due to the black glossy surface, painting is not visually necessaryIncludes mounting instructionsMaterial is flexible
Trunk sill protector for VW Passat B8 (Type 3G) Sedan LKS055-G
CSR-Automotive loading edge protection / loading edge cover for VW Passat B8 (Type 3G) sedan glossy blackLoading edge protection suitable for VW Passat B8 (Type 3G) model year 2014-2019Suitable for the model/body variant(s) sedanScratch protection for your loading edgeNo registration required, as there are no structural / aerodynamic changes to the vehicleGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and simple attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate adhesion and high bonding strengthThe installation with the 3M™ tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-configured and pre-assembled tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are exceptionally dissipated, resulting in highly durable connections.High durability even in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made from high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after mounting)Due to the black glossy surface, no paintwork is visually necessaryIncludes mounting instructionsMaterial is flexible
Trunk sill protector for Hyundai i30 (PD) hatchback LKS041-G
CSR-Automotive trunk sill protector / loading edge cover for Hyundai I30 (PD) hatchback, glossy blackTrunk sill protector compatible with Hyundai I30 (PD) model year 2017-Compatible with the model-/body variant(s) hatchbackScratch protection for your loading edgeNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus tape PT 1100 with extremely high immediate tack and high adhesionThe installation with the 3M™ tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective strip from the pre-fabricated and pre-mounted tapeAdhere, done!3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideal for mounting of rigid attachments where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, resulting in extremely durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock- and weather-resistanceEasy removal without damage to the paintThe trunk sill protector is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after mounting)Visually, no paintwork is necessary due to the black glossy surfaceIncludes mounting instructionsMaterial is flexible
Loading edge protection for BMW X1 F48 LKS026-G
CSR-Automotive Load Sill Protector / Load Sill Cover for BMW X1 F48 Glossy BlackLoad sill protector suitable for BMW X1 F48 model year 2015-Suitable for all model / body variantsScratch protection for your load edgeNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 is done in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-cut and pre-assembled tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, so that extremely durable connections are created.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe load sill protector is made from high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: peel off protective film after mounting)Because of the glossy black surface, no painting is visually requiredIncludes installation instructionsMaterial is flexible
Loading edge protection for Mercedes-Benz C-Class (S205) T-Model LKS058-G
CSR-Automotive loading edge protection / loading lip cover for Mercedes-Benz C-Class (S205) T-Model glossy blackLoading edge protection suitable for Mercedes-Benz C-Class (S205) model year 2014-2018compatible with the model/body variant(s) T-ModelScratch protection for your loading edgeRegistration-free, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ adhesive tape PT 1100 occurs in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective liner from the pre-cut and pre-mounted tapeAttach, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specially developed for the automotive sector and is ideal for attaching rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, so that highly durable connections are created.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintLoading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after installation)Due to the glossy black surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible
Trunk sill protector for BMW 3 Series F30 sedan LKS056-G
CSR-Automotive Loading edge protector / loading edge cover for BMW 3 Series F30 sedan, glossy blackLoading edge protector suitable for BMW 3 Series F30 built 10/2011–06/2019Suitable for the model-/body variant(s) sedanScratch protection for your loading edgeRegistration-free, as there are no mechanical / aerodynamic modifications to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeAdhere, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and ideally suited for fastening rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are well dissipated, so that extremely durable connections arise.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protector is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective foil after installation)Due to the black glossy surface, no paintwork is visually necessaryIncludes mounting instructionsMaterial is flexible
Loading edge protection for VW Caddy 5 (Type SB) LKS049-G
CSR-Automotive Loading Edge Protection / Loading Edge Cover for VW Caddy 5 (Type SB) Glossy BlackLoading edge protection suitable for VW Caddy 5 (Type SB) from 2020 onwardSuitable for all model-/body variantsScratch protection for your loading edgeNo registration required, as there are no structural / aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate adhesion and high bonding strengthThe mounting with the 3M™ Adhesive Tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-cut and pre-mounted tapeApply, done!3M™ Acrylic Plus Adhesive Tape PT1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate bonding power that was specially developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetically visible edge is desired. PT1100 features very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are effectively dissipated, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Due to the glossy black surface, visually no painting is necessaryIncludes mounting instructionsMaterial is flexible
Loading edge protector for Tesla Model Y LKS045-G
CSR-Automotive loading-edge protection / loading-edge cover for Tesla Model Y black glossyLoading-edge protection suitable for Tesla Model Y model year 2020-Fits all model/body variantsScratch protection for your loading edgeNo registration required, as there are no structural or aerodynamic modifications to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment via3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective liner from the pre-cut and pre-assembled tapeAttach, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading-edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after mounting)Because of the black glossy surface, visually no painting is requiredIncludes mounting instructionsMaterial is flexible
Charging edge protection for Audi e-tron GT LKS036-G
CSR-Automotive Charging Sill Protection / Charging Sill Cover for Audi e-tron GT Glossy BlackCharging sill protection suitable for Audi e-tron GT model year 2020-Compatible with all model/body variantsScratch protection for your charging edgeNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective liner from the pre-cut and pre-assembled tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintCharging sill protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after mounting)Because of the glossy black surface, visually no paintwork is necessaryIncludes mounting instructionsMaterial is flexible
Trunk sill protector for Opel Insignia B Sports Tourer LKS035-G
CSR-Automotive Loading edge protection / loading edge cover for Opel Insignia B black glossyLoading edge protection suitable for Opel Insignia B model year 2017-compatible with the model-/body variant(s) Sports Tourer and Country TourerScratch protection for your loading edgeNo registration required, as there is no structural / aerodynamic modification to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting via3M™ Acrylic Plus Tape PT 1100 with extremely high immediate adhesion and high tackThe mounting with the 3M™ tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100 stresses in the adhesive joint are well dissipated, so that extremely durable connections are created.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintLoading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Due to the black glossy surface no paintwork is visually requiredIncludes installation instructionsMaterial is flexible
Loading edge protection for VW T6 / T6.1 LKS033-G
CSR-Automotive loading edge protection / loading edge cover for VW T6 / T6.1, high-gloss blackLoading edge protection suitable for VW T6 / T6.1, model year 2015-Suitable for the model-/body variants Transporter, Multivan, and Caravelle (with tailgate)Scratch protection for your loading edgeNot requiring registration, as there are no structural / aerodynamic changes to the vehicleGood fit, as this is not a universal part but developed specifically for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe assembly with the 3M™ Adhesive Tape PT 1100 occurs in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted adhesive tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe load edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Because of the black glossy surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible
Loading edge protector for VW Polo 6 (Type AW) LKS032-G
CSR-Automotive Load Edge Protection / Loading Edge Cover for VW Polo 6 (Type AW) Glossy BlackLoad edge protection suitable for VW Polo 6 (Type AW) model year 2017-Suitable for all model and body variantsScratch protection for your loading edgeRegistration-free, as there are no structural/aerodynamic modifications to the vehicleGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate adhesion and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective film from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high instant bonding power that was specifically developed for the automotive sector and is ideally suited for mounting rigid attachments where an aesthetic visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Thanks to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, resulting in highly durable joints.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintLoad edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after mounting)Due to the glossy black surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible
Luggage sill protector for Audi Q5 (FYT) Sportback LKS031-G
CSR-Automotive tailgate edge protection / load edge cover for Audi Q5 (FYT) Sportback black glossyTailgate edge protection suitable for Audi Q5 (FYT) Year 2021-suitable for the model-/body variant(s) SportbackScratch protection for your loading edgeNo registration required, as there are no structural / aerodynamic changes to the vehicleGood fit, as it is not a universal part but specially developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high bond strengthThe mounting with the 3M™ tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeAttach, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was designed specifically for the automotive sector and is ideally suited for attaching rigid attachments where an aesthetically visible edge is desired.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintTailgate edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after installation)Because of the black glossy surface, visually no painting is necessaryIncludes mounting instructionsMaterial is flexible
Loading edge protection for VW Passat B7 (3C) Variant LKS025-G
CSR-Automotive loading edge protection / loading edge cover for VW Passat B7 (3C) Variant glossy blackLoading edge protection suitable for VW Passat B7 (3C) model year 2010-2015Fits the model/body variant(s) VariantScratch protection for your loading edgeNo registration required, as there is no structural / aerodynamic modification to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Tape PT 1100 with extremely high instant bonding strength and high adhesionThe mounting with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape developed specifically for the automotive sector and ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are effectively dissipated, so that very durable joints are created.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damaging the paintLoading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: Remove protective film after mounting)Due to the glossy black surface, visually no paintwork is necessaryIncludes mounting instructionsMaterial is flexible
Trunk edge protector for BMW 4 Series F36 LKS054-G
CSR-Automotive Loading edge protection / loading edge cover for BMW 4 Series F36 black glossLoading edge protection suitable for BMW 4 Series F36, model year 10/2013–06/2021Suitable for the model/body variant(s) Gran CoupeScratch protection for your loading edgeNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Tape PT 1100 with extremely high initial bonding and high adhesive strengthThe mounting with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective strip from the pre-fabricated and pre-mounted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial bonding strength that has been specifically developed for the automotive sector and is ideally suited for attaching rigid accessories where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock- and weather-resistanceEasy removal without damage to the paintLadekantenschutz ist aus hochwertigem Material ABS gefertigt und mit einer hochglänzenden makellosen Oberfläche versehen - besser als lackiert! (Achtung: Schutzfolie nach Montage abziehen)Visually, no paintwork is necessary due to the black glossy surfaceIncludes mounting instructionsMaterial is flexible
Loading edge protection for Opel Astra J Sports Tourer LKS053-G
CSR-Automotive Load Lip Protection / Load Lip Cover for Opel Astra J Glossy BlackLoad lip protection suitable for Opel Astra J, model year 2010-2015Fits the model/body variant(s): Sports TourerScratch protection for your load lipNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe installation with the 3M™ Adhesive Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective layer from the pre-cut and pre-assembled tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specially developed for the automotive sector and is ideally suited for attaching rigid accessory parts where an aesthetic edge is desired. PT 1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT 1100, stresses in the adhesive seam are well dissipated, resulting in highly durable joints.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintLoad lip protection is made of high-quality ABS material and has a high-gloss flawless surface - better than painted! (Note: remove protective foil after installation)Because of the glossy black surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible