Tuning parts compatible with SEAT
Heckspoiler | Heckflügel mit ABE für Seat Ibiza 5 (6F) HF209
CSR-Automotive Heckspoiler | Heckflügel | Hecklippe | Abrisskante für Seat Ibiza 5 (6F) mit ABE (Eintragungsfrei!)Heckspoiler passend für Seat Ibiza 5 (6F) Baujahr 2017-passend für alle Modell-/Karosserievariantennur passend in Kombination mit CSR-HF206Seitenteil-Set (2-teilig)Mit ABE (allgemeine Betriebserlaubnis) und somit eintragungsfreiGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels 3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackHeckflügel ist aus hochwertigen Material ABS gefertigtInklusive Montagezubehör, sofern notwendigInklusive MontageanleitungMaterial ist flexibel
Gooseneck rear wing with ABE documentation, only applicable in Germany for Seat / Cupra Leon 4 (Type KL) SHF079
CSR Automotive Swan-Neck Rear Wing for Seat / Cupra Leon 4 (Typ KL) with ABE (no registration required in Germany!)Swan-neck rear wing compatible with Seat / Cupra Leon 4 (Typ KL), model year 2020-compatible with all model/body variants except STSwan-neck rear wing kit consisting of wing blade and vehicle-specific bracketsDistinctive motorsport design for a particularly sporty rear viewIncludes ABE (general operating permit) / TTG (part type approval) documentation, so no registration required in GermanyGood fit, as this is not a universal part but was developed specifically for this vehicle type!Important installation note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be completely removed before installing the swan-neck rear wing to ensure a precise fit and optimal aerodynamics.Installation is carried out by bolting to the rear of the vehicle; mounting hardware is includedSwan-neck rear wing is made from high-quality fiberglass reinforced plastic (FRP)The advantages of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and nonflammability. Very high manufacturing quality and low weight even allow use in professional motorsports. The distinctive black surface is easy to work with and guarantees professional results. FRP products from CSR Automotive are ideally suited for repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive prep work (wing blade is unpainted - brackets are already painted black)Includes installation instructionsMaterial is flexible
Gooseneck rear wing with ABE documentation for Audi A4 / S4 / RS4 B7 (Type 8E) / Seat Exeo Sedan SHF010
CSR Automotive swan neck rear wing for Audi A4 / S4 / RS4 B7 (Type 8E) sedan / Seat Exeo sedanSwan neck rear wing fits Audi A4 / S4 / RS4 B7 (Type 8E), model years 2004-2008fits the sedan body stylefits Seat Exeo, model years 2008-2013fits the sedan body styleswan neck rear wing kit consisting of wing blade and vehicle-specific bracketsdistinct motorsport design for a particularly sporty rear appearancesupplied with ABE documentation (general operating permit) / TTG documentation, only applicable in Germany and therefore no registration required in GermanyGood fit, since this is not a universal part but was developed specifically for this vehicle type!Important installation note: If your vehicle is factory-equipped with an original rear spoiler lip, it must be completely removed before installing the swan neck rear wing to ensure a precise fit and optimal aerodynamics.Installation is carried out by bolting to the rear of the vehicle; mounting hardware is includedThe swan neck rear wing is made from high-quality fiberglass reinforced plastic (FRP)The benefits of this composite material: extremely high flexibility combined with high stability, resistance to splintering, and non-flammability. Very high manufacturing quality and low weight even make it suitable for professional motorsport. The characteristic black surface is easy to work with and helps ensure professional results. CSR Automotive FRP products are exceptionally well suited for repair and other conversion work thanks to excellent cutting and bonding properties.Uniform surface texture allows painting without extensive prep work (wing blade is unpainted - brackets are already painted black)Includes installation instructionsMaterial is flexible
Side skirts supplied with ABE documentation for Seat Tarraco FR SS626
CSR Automotive side skirts for Seat Tarraco FR with ABE/TTGSide skirt set (left and right) suitable for Seat Tarraco model year 2018-2024Suitable for the FR model/body variant(s)With ABE (general operating permit) / TTG (type approval) and therefore no registration required in GermanyGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy fixing using 3M™ Acrylic Foam Tape PX5011F with extremely high initial tack and strong adhesive forceInstallation with 3M™ tape PX5011F takes place in four simple steps:Clean the surface with the included 3M cleaning clothApply the included 3M primer to the surfaceRemove the protective strip from the pre-configured and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Foam Tape PX5011F consists of acrylic foam and is particularly suitable for fixing add-on parts in the automotive sector. Its special product properties create high adhesion on difficult surfaces. PX5011F offers excellent adhesion to low-energy plastics (LSE) and many automotive paints. Thanks to its unique viscoelasticity, PX5011F can reversibly dissipate stresses. In contrast to foam adhesive tapes (PE, PU tapes), it largely compensates for differences in expansion between joining partners when temperatures change.High durability even in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceSide skirts are manufactured from high-quality ABSIncluding fitting accessories, where necessaryIncluding fitting instructionsMaterial is flexible
Product bundle | rear spoiler | rear wing with ABE documentation, only applicable in Germany for Seat Ibiza 5 (6F) PS037
CSR Automotive product bundle | rear spoiler | rear wing | rear lip | trailing edge for Seat Ibiza 5 (6F) with ABE (no registration required!)Rear spoiler suitable for Seat Ibiza 5 (6F), model year 2017-suitable for all model/body variantsProduct bundle consisting of rear wing CSR-HF206 and side sections CSR-HF209With ABE (general operating permit) and therefore no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothRemove the protective strip from the pre-assembled and pre-fitted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specifically developed for the automotive sector and ideally suited for attaching rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide variety of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are superbly dissipated, creating extremely durable bonds.High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintworkRear wing is made from high-quality ABSIncludes fitting accessories, if requiredIncludes fitting instructionsMaterial is flexible
Carbon-look rear lip for Seat Toledo IV Type KG HL131-C
CSR Automotive rear lip / rear spoiler in carbon-look for Seat Toledo IV Type KGRear spoiler suitable for Seat Toledo IV Type KG, model year from 10/2012suitable for the Toledo IV Type KG model/body variant(s)Supplied with vehicle-specific Teilegutachten documentation for an installation inspection in accordance with § 19.3 StVZO, only applicable in GermanyGood fit, as this is not a universal part but has been specially developed for this vehicle type!Clean and simple fastening using3M™ Acrylic Plus tape PT 1100 with extremely high initial adhesion and strong bonding strengthInstallation with the 3M™ PT 1100 tape is carried out in three simple steps: Clean the surface with the included 3M cleaning cloth Remove the protective strip from the pre-cut and pre-assembled tape Stick it on, done! 3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an attractive visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the adhesive joint are effectively reduced, creating extremely durable bonds. High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistance Easy removal without damage to the paintworkInstallation instructions includedRear spoiler is made from high-quality flexible plastic with a carbon-look surface coatingComparison images - pictures show the article on Audi A5 Cabriolet
Carbon-look rear spoiler lip for Seat Toledo 1L HL075-C
CSR Automotive rear spoiler / rear lip in carbon-look for Seat Toledo 1L Rear spoiler suitable for Seat Toledo 1L, model year 1991-1999for saloon body style(s)Supplied with vehicle-specific Teilegutachten documentation, only applicable in Germany, for fitting approval under § 19.3 StVZOGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and simple attachment using3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and high adhesive strengthInstallation with 3M™ tape PT 1100 is carried out in three simple steps: Clean the surface with the supplied 3M cleaning cloth Remove the protective strip from the pre-configured and pre-assembled tape Stick it on, done! 3M™ Acrylic Plus tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial adhesion, developed specifically for the automotive sector and ideally suited to fixing rigid add-on parts where an aesthetically neat visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively absorbed, creating extremely durable bonds. High durability even in car washes, at high speeds and in extreme temperatures and humidity, plus high shock and weather resistance Easy removal without damage to the paintworkIncludes fitting instructionsRear spoiler is made from high-quality flexible plastic with a carbon-look surface finishMaterial is flexibleComparison images - pictures show the item on an Audi A5 Cabrio
Carbon-look rear lip for Seat Toledo 1M HL074-C
CSR Automotive rear lip / rear spoiler in carbon-look for Seat Toledo 1M Rear spoiler suitable for Seat Toledo 1M, model years 1999-2004for saloon body style(s)Supplied with vehicle-specific Teilegutachten documentation, only applicable in Germany, for fitting approval under § 19.3 StVZOGood fit, as this is not a universal part but was developed specifically for this vehicle type!Clean and simple fastening using3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and strong adhesive strengthInstallation with 3M™ Tape PT 1100 is carried out in three simple steps: Clean the surface with the included 3M cleaning cloth Remove the protective strip from the pre-prepared and pre-fitted adhesive tape Stick it on, done! 3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack, specially developed for the automotive sector and ideally suited for fastening rigid add-on parts where an aesthetic visible edge is desired. PT1100 offers very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability and very good conformity to the surfaces being bonded. Thanks to the unique viscoelastic properties of PT1100, stresses in the bond line are effectively dissipated, creating extremely durable bonds. High durability even in car washes, at high speeds and in extreme temperatures and humidity, as well as high shock and weather resistance Easy removal without damage to the paintworkIncludes fitting instructionsRear spoiler is made from high-quality flexible plastic with a carbon-look surface finishMaterial is flexibleComparison images - pictures show the item on an Audi A5 Cabrio
Front spoiler | Cup spoiler lip with ABE for Seat Ibiza 5 (6F) CSL918
CSR-Automotive Front spoiler | Cup spoiler lip for Seat Ibiza 5 (6F) with ABE (Registration-Free!)Cup spoiler lip suitable for Seat Ibiza 5 (6F) model year 2017-Suitable for all model-/body variants (including facelift)Sporty look and integrated underrun protection for your original bumperWill be riveted to the original bumper, mounting hardware is includedWith ABE (General Operating Permit) and thus no registration requiredGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Diffuser | rear apron with ABE for Seat Leon 3 (Type 5F) Cupra 300 HA406
CSR-Automotive Diffuser | Rear bumper extension for Seat Leon 3 (Type 5F) Cupra 300 with ABE/TTGRear bumper extension suitable for Seat Leon 3 (Type 5F) model year (facelift) 2018-2020Fits the model/body variant(s) ST Cupra 300With ABE (general operating permit) / TTG (type approval) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Rear bumper extension is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Cupra / Seat Ateca HF276
CSR-Automotive rear spoiler | rear wing | rear lip | trailing edge for Cupra / Seat Ateca with ABE (registration-free!)Rear spoiler suitable for Cupra / Seat Ateca, model year 2016-Suitable for all model/body variantsRear wing below the rear windowWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus tape PT 1100 with extremely high initial tack and high adhesionThe installation with the 3M™ tape PT 1100 takes place in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for attaching rigid add-on parts where an aesthetically visible edge is desired.PT 1100 offers very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded.Thanks to the unique viscoelastic property of PT 1100, stresses in the adhesive seam are effectively dissipated, resulting in highly durable joints.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Seat Tarraco HF244
CSR-Automotive Rear Spoiler | Spoiler | Rear Lip | Tear-off Edge for Seat Tarraco with ABE (registration-free!)Rear spoiler suitable for Seat Tarraco model year 2018-2024Compatible with all model-/body variants except FRWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically designed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high adhesionThe installation with the 3M™ Acrylic Plus Tape PT 1100 is performed in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective backing from the pre-fabricated and pre-assembled tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specially developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are well dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear spoiler is made of high-quality material ABSIncludes mounting accessories, if necessaryIncludes mounting instructionsMaterial is flexible
Loading edge protector for Seat Leon 3 (Type 5F) LKS022-G
CSR-Automotive Load Lip Protection / Load Lip Cover for Seat Leon 3 (Type 5F) Glossy BlackLoad lip protection compatible for Seat Leon 3 (Type 5F) model year 2012-2020compatible with the model-/body variant(s) 5-doornot compatible for ST and SCScratch protection for your loading edgeNo registration required, as there is no structural /aerodynamic modification to the vehicleGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy fastening using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe mounting with the 3M™ adhesive tape PT 1100 takes place in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective liner from the pre-fabricated and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high instant tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove protective film after installation)Due to the glossy black surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible
Cargo sill protector for Seat Tarraco LKS009-G
CSR-Automotive loading edge protection / loading edge cover for Seat Tarraco black glossyLoading edge protection suitable for Seat Tarraco model year 2018-Suitable for all model and body variantsScratch protection for your loading edgeRegistration-free, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with exceptionally high instant bonding and strong adhesionThe mounting with the 3M™ tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate bonding strength, specifically developed for the automotive sector and ideal for attaching rigid add-on parts where an aesthetic visible edge is desired. PT1100 features very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock- and weather-resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after installation)Because of the black glossy surface, no painting is visually requiredIncludes mounting instructionsThe material is flexible
Front spoiler | Cup spoiler lip with ABE for Seat Tarraco CSL946
CSR-Automotive Front Spoiler | Cup Spoiler Lip for Seat Tarraco with ABE (no registration required!)Cup spoiler lip suitable for Seat Tarraco model year 2018-2024compatible with all model/body variants except FRSporty look and integrated underbody protection for your original bumperIs riveted to the original bumper, mounting hardware includedWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality material ABSIncludes mounting accessories, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | Rear wing with ABE for SEAT Tarraco HF245
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Trailing Edge for Seat Tarraco with ABE (no registration required!)Rear spoiler suitable for Seat Tarraco model year 2018-2024Suitable for all model-/body variants except FRTwo-piece side partsWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically designed for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high initial tack and high adhesive strengthThe assembly with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothRemove the protective strip from the pre-cut and pre-assembled tapeAttach, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial bonding strength that was specifically developed for the automotive sector and is ideal for mounting rigid attached parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | Rear wing with ABE for Seat Ibiza 5 (6F) HF206
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Tear-off Edge for Seat Ibiza 5 (6F) with ABE (registration-free!)Rear spoiler suitable for Seat Ibiza 5 (6F) model year 2017-compatible for all model-/body variantsWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Tape PT 1100 with extremely high immediate bonding strength and high tackThe installation with the 3M™ Tape PT 1100 takes place in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-mounted tapeAdhere it, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate bonding power that was specifically developed for the automotive sector and is ideal for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes installation instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Seat Leon 3 (Type 5F) Cupra R ST HF167
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Leading Edge for Seat Leon 3 (Type 5F) Cupra R ST with ABE (registration-free!)Rear spoiler suitable for Seat Leon 3 (Type 5F) model year 2017-2020Suitable for the model/body variant(s) Cupra R STWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high instant tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-cut and pre-assembled tapeAttach, finished!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate bonding strength that was specifically developed for the automotive sector and is ideally suited for attaching rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Front spoiler | Cup spoiler lip with ABE for Seat Leon 3 (Type 5F) Cupra R CSL885
CSR-Automotive Front Spoiler | Cup Spoiler Lip for Seat Leon 3 (Type 5F) Cupra R with ABE (registration-free!)Cup spoiler lip suitable for Seat Leon 3 (Type 5F) model year 2017-2020suitable for the model-/body variant(es) Cupra R Sporty look and integrated undercarriage protection for your original bumperIs riveted to the original bumper, mounting hardware is includedWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically designed for this vehicle type!Cup spoiler lip made from high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Front spoiler | Cup spoiler lip with ABE for Seat Leon 2 (Type 1P) CSL876
CSR-Automotive Front spoiler | Cup spoiler lip for Seat Leon 2 (Type 1P) with ABE (Registration-Free!)Cup spoiler lip suitable for Seat Leon 2 (Type 1P) model year 2009-2012Suitable for all model/body variants except Copa, Cupra and FRSporty look and integrated underrun protection for your original bumperIs riveted to the original bumper; mounting hardware includedWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Side window blinds with ABE for Seat / Cupra Leon 4 (KL type) hatchback SSB029
CSR-Automotive Side Window Blinds for Seat / Cupra Leon 4 (KL-type) Hatchback with ABE/TTGSide window blind set (left and right) suitable for Seat / Cupra Leon 4 (KL-type) year 2020-Suitable for the model/body variant(s) HatchbackNot suitable for STWith ABE (General Operating Permit) / TTG (Parts Type Approval) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Tape PT 1100 with extremely high immediate adhesion and high bond strengthThe installation with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-fabricated and pre-assembled tapeAdhere, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high instant tack that was specially developed for the automotive sector and ideally suited for attaching rigid attachments where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintSide window blinds are made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | Rear wing with ABE for Seat Leon 2 (Type 1P) HF161
CSR-Automotive Rear Spoiler | Rear Wing | Tail Lip | Tear-off Edge for Seat Leon 2 (Type 1P) with ABE (exemption from registration!)Rear spoiler suitable for Seat Leon 2 (Type 1P) model year 2009-2012 (facelift)fits all model/body variantsWith ABE (general operating permit) and thus exempt from registrationGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ tape PT 1100 is performed in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective strip from the pre-fabricated and pre-mounted tapeAdhere it, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid attached parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | Rear wing with ABE for Seat / Cupra Leon 4 (Type KL) ST HF150
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Tear Edge for Seat / Cupra Leon 4 (KL type) ST with ABE (registration-free!)Rear spoiler suitable for Seat / Cupra Leon 4 (KL) year 2020-Suitable for the model-/body variant(s) STWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specially developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bond strengthThe installation with the 3M™ Adhesive Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective liner from the pre-cut and pre-assembled tapeAdhere, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in extremely durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Seat / Cupra Leon 4 (Type KL) ST HF146
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Lip edge for Seat / Cupra Leon 4 (KL type) ST with ABE (no registration required!)Rear spoiler suitable for Seat / Cupra Leon 4 (KL type) model year 2020-Suitable for the model/body variant(s) STRear wing below the rear windowWith ABE (general operating permit) and thus no registration requiredGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high adhesionThe mounting with the 3M™ Adhesive Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning wipePeel the protective strip from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid attachment parts where an aesthetic visible edge is desired.PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded.Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are dissipated very well, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintRear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible