Buy Widebody Fender Flares online
Kotflügelverbreiterung für VW Golf 8 VB038-G
CSR-Automotive Kotflügelverbreiterung / Radlaufverbreiterung für VW Golf 8 schwarz glänzendKotflügelverbreiterung passend für VW Golf 8 Baujahr 2019-passend für alle Modell-/Karosserievarianten ausgenommen VariantRadlaufverblendungs-Set für alle 4 RadläufeMit fahrzeugspezifischem Teilegutachten für eine Anbauabnahme nach §19.3 StVZOGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels 3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackKoflügelverbreiterungen sind aus hochwertigem Material ABS gefertigt und mit einer schwarz hochglänzenden Oberfläche versehen - besser als lackiert! (Achtung: Schutzfolie nach Montage abziehen)Durch die schwarz hochglänzende Oberfläche ist optisch keine Lackierung notwendigInklusive Montagezubehör, sofern notwendigInklusive MontageanleitungMaterial ist flexibel
Fender flare for Opel Astra L VB037
CSR-Automotive Fender Extensions / Wheel Arch Extensions for Opel Astra LFender extension fits Opel Astra L, year 2022-Suitable for the model/body variant(s) hatchbackNot suitable for Sports TourerWheel arch cover set for all four wheel archesNo certification included, therefore individual approval under §21 StVZO is required. If desired, we can supply this item with a material test certificate.Good fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high bonding strengthThe installation with the 3M™ tape PT 1100 takes place in three simple steps:Clean the substrate with the included 3M cleaning clothPeel the protective film off the pre-cut and pre-assembled tapeAdhere, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that has been specifically developed for the automotive sector and is ideally suited for fastening rigid mounting parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, so that extremely durable connections are formed.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintFender extensions are made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Fender widening for Mini F56 / F57 VB036
CSR-Automotive Fender Flares / Wheel Arch Extensions for Mini F56 / F57Fender flare suitable for Mini F56 / F57, year 2014-suitable for the model/body variant(s) One, Cooper, Cooper S and Cooper SEnot suitable for JCW and JCW GP, as well as for vehicles with front PDCWheel arch cladding set for all four wheel archesWith vehicle-specific parts certificate for installation approval under §19.3 StVZOGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high adhesionThe installation with the 3M™ Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective liner from the pre-fabricated and pre-mounted adhesive tapeStick it on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specially developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive joint are exceptionally reduced, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintFender wideners are made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Fender flare for BMW 2 Series F22/F23 VB034
CSR-Automotive Fender Extenders / Wheel Arch Extensions for BMW 2 Series F22/F23Fender extensions suitable for BMW 2 Series F22/F23 model years 2013-2021Suitable for all model-/body variantsWheel arch cover set for all 4 wheel archesWith vehicle-specific parts certificate for an installation approval according to §19.3 StVZOGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 is performed in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective film from the pre-fabricated and pre-mounted tapeAttach, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are excellently dissipated, resulting in highly durable bonds.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintExtensions are made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible
Fender flare for Hyundai i30 (PD) VB035
CSR-Automotive Fender Flare / Wheel Arch Extension for Hyundai I30 (PD)Fender flare compatible with Hyundai I30 (PD) year of manufacture 2017-Compatible with the hatchback model/body variant including N, N-Performance and N-LineNot compatible with FastbackWheel arch cladding kit for all four wheel archesGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and simple attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high instant tack and high bonding strengthThe installation with the 3M™ Adhesive Tape PT 1100 is carried out in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective strip from the pre-cut and pre-assembled adhesive tapeStick on, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, so that extremely durable connections are formed.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe extensions are made of high-quality ABS materialIncludes mounting instructionsMaterial is flexibleNo certification required, therefore individual approval under §21 StVZO is required. If desired, we can provide this item with a material certificate.
Fender flare for VW Golf 7 (Type AU) VB033
Bitte übersetze den folgenden Text von Deutsch nach English: - Bitte kommentiere die Ausgabe nicht. - Wenn es nur eine Nummer ist, oder eine ProduktID und du nicht weiß, wie man es am besten übersetzt, dann gebe das exakt gleiche als Antwort. Kommentiere es aber nicht. - Die Ausgabe muss identisch sein. Wenn es Text war, gebe Text raus. Wenn es HTML war, gebe HTML raus. Nichts anderes. 1:1 wie der Text zuvor, nur halt eben übersetzt. Keine Extra Zeichen. - Nutze auch keine und Tags in der Ausgabe. Wie im Original. - , , und , , sind keine Tags und DÜRFEN NICHT übersetzt werden. DAS IST GANZ WICHTIG!!! Bitte beachte folgende Anweisungen bei der Übersetzung: CSR-Automotive Kotflügelverbreiterung / Radlaufverbreiterung für VW Golf 7 (Typ AU)Kotflügelverbreiterung passend für VW Golf 7 (Typ AU) Baujahr 2017-2021 (Facelift)passend für die Modell-/Karosserievariante Schräghecknicht passend für VariantRadlaufverblendungs-Set für alle 4 Radläufebei Fahrzeugen mit PDC-Sensoren im Bereich der hinteren Radläufe müssen die Öffnungen für diese ausgeschnitten (gebohrt) werdenMit fahrzeugspezifischem Teilegutachten für eine Anbauabnahme nach §19.3 StVZOGute Passform, da kein Universalteil sondern speziell für diesen Fahrzeugtyp entwickelt!Saubere und einfache Befestigung mittels3M™ Acrylic Plus Klebeband PT 1100 mit extrem hoher Soforthaftung und hoher KlebkraftDie Montage mit dem 3M™ Klebeband PT 1100 erfolgt in drei einfachen Schritten:Den Untergrund mit dem beiliegenden 3M Reinigungstuch reinigenDen Schutzstreifen vom vorkonfektionierten und vormontierten Klebeband abziehenAnkleben, fertig!3M™ Acrylic Plus Klebeband PT 1100 ist ein 4-lagiges schwarzes doppelseitiges Acrylatklebstoffband mit sehr hoher Sofortklebkraft das speziell für den Automotiv-Bereich entwickelt wurde und ideal geeignet ist zur Befestigungen von starren Anbauteilen bei denen eine ästhetische Sichtkante gewünscht ist. PT1100 verfügt über eine sehr gute Adhäsion zu einer Vielzahl von automobilen Oberflächen, gute innere Festigkeit, hervorragende Langzeitstabilität sowie sehr gute Anpassungsfähigkeit an die zu verklebenden Flächen. Durch die einzigartige viskoelastische Eigenschaft des PT1100 werden Spannungen in der Klebenaht hervorragend abgebaut, so dass äußerst haltbare Verbindungen entstehen.Hohe Haltbarkeit auch in Waschstraßen, bei hohen Geschwindigkeiten und extremen Temperaturen und Feuchtigkeit, sowie hohe Schock- und WitterungsbeständigkeitEinfacher Rückbau ohne Schäden am LackVerbreiterungen sind aus hochwertigem Material ABS gefertigtInklusive MontageanleitungMaterial ist flexibel
Rear wheel arch extension for VW T-Cross C1 VB024
CSR-Automotive rear fender flare extension for VW T-Cross (Type C1)Rear fender flare extension suitable for VW T-Cross (Type C1) model year 2018-for all model-/body variantsincluding mounting hardware, if necessaryRear fender flare set, 2-piece, rear for left and right sidesMakes the wheel arch covers paintable (material thickness approx. 4mm)Rear fender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time high stability, splinter resistance, and non-flammability. Very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further modification work thanks to best cutting and bonding properties.Even surface texture enables painting with little preparation (the product is unpainted)Material is flexibleNo certificate, therefore individual approval according to §21 StVZO is required. If desired, we can supply this item with a material certificate.
Front fender flare for VW T-Cross C1 VB023
CSR-Automotive Front Fender Flare for VW T-Cross Type C1Front Fender Flare compatible with VW T-Cross (Type C1) model year 2018-for all model/body variantsincl. mounting hardware, if necessaryFront Fender Flare set, 2-piece, for left and right sidesMakes the wheel arch covers paintable (material thickness approx. 4 mm)The Fender Flare is made from the innovative and high-quality material Fiberflex. The advantages of this new composite material: extremely high flexibility while simultaneously high rigidity, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are highly suitable for repair and further modification work thanks to the best cutting and bonding properties.Even surface texture enables painting with little to no preliminary work (product is unpainted)Material is flexibleNo certificate, therefore individual approval under §21 StVZO is required. If desired we can supply this item with a material certificate.
Rear wheel arch extension for Mercedes-Benz SLK / SLC R172 VB018
CSR-Automotive rear fender flare for Mercedes-Benz SLK / SLC R172Rear fender flare suitable for Mercedes-Benz SLK / SLC R172 model year 03/2011-for all model-/body variant(s) with AMG-Line ExteriorIncludes mounting hardware, if necessaryRear fender flare set 6-piece rear for left and right sideIncreases the rear wheel arch by approximately 2.4 cm per sideThe fender flare is made of the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while simultaneously great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is noted for good machinability and guarantees professional results. Fiberflex products from CSR-Automotive are particularly well suited thanks to the best cutting and bonding properties for repair and further modification work.Even surface texture enables painting without major pre-treatment (product is unpainted)Material is flexibleNo approvals, therefore individual approval under §21 StVZO is required. If desired, we can supply this item with a material certificate.
Front fender flare for Mercedes-Benz SLK / SLC R172 VB017
CSR-Automotive front fender widening extension for Mercedes-Benz SLK / SLC R172Fender widening extension compatible with Mercedes-Benz SLK / SLC R172, model year 03/2011-for all model-/body variant(s) with AMG-Line ExteriorIncluding mounting hardware, where necessaryFront fender widening set 4-piece for left and right sideWidens the front wheel arch by approx. 2.4 cm per sideThe fender widening is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while simultaneously high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is easy to process and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further modification work thanks to best cutting and bonding properties.Even surface texture enables painting without major prep work (product is unpainted)Material is flexibleNo certification is included, therefore individual approval under §21 StVZO is required. If desired, we can provide this item with a material certificate.
Rear fender flare for VW Golf 6 VB016
CSR-Automotive rear fender extension for VW Golf 6Rear fender extension compatible with VW Golf 6 model year 2008-2012for the model/body variant(s) 5-doorIncludes mounting hardware, if necessaryRear fender extension set, 4-piece, for left and right sidesWidens the rear wheel arch by approximately 2.4 cm per sideWith vehicle-specific parts certificate for installation approval under §19.3 StVZORear fender extension is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is characterized by good workability and guarantees professional results. CSR-Automotive Fiberflex products are highly suitable for repair and further modification work thanks to excellent cutting and adhesive properties.Even surface texture enables painting without extensive pre-work (product is unpainted)Material is flexible
Front fender flare for VW Golf 6 VB015
CSR-Automotive front fender flare for VW Golf 6Fender flare suitable for VW Golf 6 model year 2008-2012for all model-/body variantsIncludes installation hardware, if necessaryFront fender flare set, 4-piece, for left and right sidesExtends the front wheel arch by about 2.4 cm per sideWith vehicle-specific parts certificate for installation approval under §19.3 StVZOFront fender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while maintaining high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is known for good workability and guarantees professional results. Fiberflex products from CSR-Automotive are well suited for repair and further modifications thanks to excellent cutting and bonding properties.Even surface texture enables painting with little prep (the product is unpainted)Material is flexible
Rear fender flare for Mercedes-Benz CLA C117 X117 VB014
CSR-Automotive Rear Fender Flare for Mercedes-Benz CLA C117 X117Fender flare compatible with Mercedes-Benz CLA C117 X117 from model year 01/2013for all model/body variant(s)Includes mounting hardware, where necessaryRear Fender Flare Set for left and right sideExtends the rear wheel arch by approximately 1.5 cmFender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, chip resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are exceptionally suitable for repair and further retrofit work thanks to excellent cutting and bonding properties.Even surface texture enables painting without major pre-work (product is unpainted)Material is flexibleNo appraisal required, therefore single approval under §21 StVZO is required. If desired, we will deliver this item with a material certificate.
Rear fender extension for KIA cee´d / pro_cee´d (JD) VB013
CSR-Automotive rear fender flare for KIA cee´d / pro_cee´dFender flare suitable for KIA cee´d / pro_cee´d from model year 04/2012for all model-/body variant(s), including GT and SWFlare only installable with GT side skirtsIncl. mounting hardware, if necessaryRear fender flare set for left and right sideFender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while maintaining high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is characterized by good workability and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further conversion work thanks to the best cutting and adhesive properties.Even surface texture enables painting without major prep work (product is unpainted)Material is flexibleNo certificate, therefore individual approval under §21 StVZO required. On request we supply this article with a material certificate.
Front fender flare for Kia cee'd / pro_cee'd (JD) VB012
CSR-Automotive front fender flare for KIA cee´d / pro_cee´dFender flare suitable for KIA cee´d / pro_cee´d from model year 04/2012for all model-/body variant(s), including GT and SWWidening can only be installed with GT side skirtsIncl. mounting hardware, if necessaryFront fender flare set for left and right sidesFender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while simultaneously high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is distinguished by good workability and guarantees professional results. Products from Fiberflex by CSR-Automotive are excellently suited for repair and further modification work thanks to the best cutting and adhesive properties.Even surface texture enables painting without significant pre-work (the product is unpainted)Material is flexibleNo assessment reports required, therefore Individual approval under §21 StVZO is required. If desired we deliver this item with a material certificate.
Front wheel arch extension for Porsche 911/997 GT3 Facelift VB011
CSR-Automotive Fender widening kit for Porsche 911/997Fender widening kit suitable for Porsche 911/997 model year 07/2008-2012Suitable for the model-/body variant(s) GT/3, GT/3 RS (facelift)Front widening kit, to be glued to the front bumperIncl. mounting accessories, if necessaryThe fender widening is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, splitter resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is distinguished by good machinability and guarantees professional results. Products from Fiberflex by CSR-Automotive are excellently suited thanks to the best cutting and bonding properties for repair and further modification work.Even surface texture enables painting without major priming (product is unpainted)Material is flexibleNo certification, therefore Individual approval under §21 StVZO is required. If desired, we deliver this item with a material certificate.Images may show a different vehicle model
Front wheel arch widening for Porsche 911/997 GT3 pre-facelift VB010
CSR-Automotive Fender widening for Porsche 911/997Fender widening compatible with Porsche 911/997 model year 2004-07/2008Suitable for the model-/body variant(s) GT/3, GT/3 RS (pre-facelift)Front widening set, mounted to the front bumper using adhesiveIncl. mounting accessories, if necessaryFender widening is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while maintaining great stability, chip resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products made from Fiberflex by CSR-Automotive are excellently suited for repair and further modifications thanks to the best cutting and bonding properties.Even surface texture allows painting without major pre-work (the product is unpainted)Material is flexibleNo certificate required, therefore individual approval under §21 StVZO is required. Upon request we can deliver this item with a material certificate.Images may show a different vehicle model
Front wheel arch extension for Porsche 911/997 GT2 VB009
CSR-Automotive Fender Extension for Porsche 911/997Fender widening suitable for Porsche 911/997 model year 2007-2012suitable for the model-/body variant(s) GT2Front widening kit, to be bonded to the front bumperIncl. mounting hardware, if necessaryThe Fender widening is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while simultaneously great stability, splitter resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Products from Fiberflex by CSR-Automotive are excellently suited for repair and further modification work thanks to their best cutting and adhesive properties.Even surface texture allows painting without major pre-work (the product is unpainted)Material is flexibleNo appraisal required, therefore individual approval under §21 StVZO is required. If desired we will deliver this item with a material certificate.Images may show a different vehicle model
Widening kit for Porsche 911/997 on wide body PS027
CSR-Automotive widebody kit for Porsche for 911/997 to wide bodyThe CSR-Automotive widebody kit for Porsche 911/997 widens the narrow body (C, CS, GT/3) to the level of the wide body (Turbo, Turbo S, GT/3 RS, GT/2, GT/2 RS, Targa, C4S and GTS), thus installation of an original rear bumper of the wide body is possible.Take advantage of your price advantage of EUR 98.00 compared to purchasing the parts contained in this set (The regular price is EUR 1,097.00)! The delivery includes:the CSR-Automotive mounting parts with the order numbers: VB006, VB007, SS998fender wideners and side-skirt set suitable for Porsche 911/997 model year 2004-2012suitable for the variants Carrera, Carrera S, GT3, Targa (vehicles with narrow body), not suitable for all-wheel drive vehiclesincl. mounting hardware, if necessaryAll mounting parts are made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface stands out for good machinability and guarantees professional results. Products made from Fiberflex by CSR-Automotive are well suited thanks to the best cutting and bonding properties for repair and further modification work.Even surface texture enables painting without major prep work (product is unpainted)Material is flexibleNo certificate required, therefore individual approval under §21 StVZO required. Upon request we will deliver this item with a material certificate.In addition to this set there is also a widening of the front bumper available to achieve a full-line widening, but this is model-specific (and therefore not part of this set):CSR-VB008 Widebody kit for Turbo front bumperCSR-VB009 Widebody kit for GT2 front bumperCSR-VB010 Widebody kit for GT3 (pre-facelift) front bumperCSR-VB011 Widebody kit for GT3 (facelift) front bumper(More info see below or please use the search function in the shop. Please note that the photos may depict additional products not included in this offer. This offer includes only the parts listed above with their article numbers!)
Front wheel arch extension for Porsche 911/997 Turbo VB008
CSR-Automotive Fender Flare Extension for Porsche 911/997Fender flare extension suitable for Porsche 911/997 model year 2004-2012Suitable for the model-/body variant(s) Turbo/Turbo SFront widening set, to be glued to the front bumperIncludes mounting hardware, if necessaryFender flare extension is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while simultaneously high stability, debris impact resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is easy to work with and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further modification work thanks to their excellent cutting and bonding properties.Even surface texture enables painting with little pre-work (product is unpainted)Material is flexibleNo assessment report required, therefore single approval under §21 StVZO is required. If desired, we will provide this item with a material certificate.
Front wheel arch extension for Porsche 911/997 VB007
CSR-Automotive Fender Flares for Porsche 911/997Fender flares suitable for Porsche 911/997 model years 2004-2012compatible with all model/body variantsFront widening kit, to be glued to the fenderWidening by 14mm per sideIncl. mounting hardware, if necessaryFender flare is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, stone-chip resistance, and non-flammability. A very high manufacturing quality and the low weight allow even usage in professional motorsport. The characteristic black surface is distinguished by good workability and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited thanks to best cutting and bonding properties for repair and further modification work.Even surface texture enables painting without major pre-work (the product is unpainted)Material is flexibleNo certificate, therefore individual approval under §21 StVZO is required. If desired, we deliver this item with a material certificate.
Rear wheel arch widening for Porsche 911/997 VB006
CSR-Automotive Fender widening for Porsche 911/997Fender widening kit compatible with Porsche 911/997 model year 2004-2012Compatible with the model/body variant(s) Carrera, Carrera S, GT/3 (vehicles with narrow bodyshell)Rear widening kit, bonded to the fenderWidens the narrow bodied car (C, CS, GT/3) to the level of the wide bodied car (Turbo, Turbo S, GT/3 RS, GT/2, GT/2 RS, Targa, C4S and GTS), thus enabling the installation of the original rear bumper of the wide bodied carWidening from 1808mm to 1852mmIncludes mounting hardware, if necessaryFender widening is made from the innovative and high-quality material Fiberflex. The advantages of this novel composite material: extremely high flexibility while at the same time great stability, splinter resistance, and non-flammability. A very high manufacturing quality and the low weight allow even use in professional motorsport. The characteristic black surface is distinguished by good machinability and guarantees professional results. Fiberflex products from CSR-Automotive are excellently suited for repair and further modification work thanks to best cutting and bonding properties.Even surface texture enables painting without extensive priming (product is unpainted)Material is flexibleNo assessment required, therefore Individual approval under §21 StVZO is required. If desired, we will deliver this item with a material certificate.
Radlaufverbreiterung für Porsche 911 / 993 hinten VB005
CSR-Automotive Kotflügelverbreiterung für Porsche 911 / 993Kotflügelverbreiterung passend für Porsche 911 993 Baujahr 1993-1998für alle VariantenVerbreiterungs-Set für hinten, wird an den Kotflügel verklebtInkl. Montagezubehör, sofern notwendigKotflügelverbreiterung ist aus dem innovativen und hochwertigen Material Fiberflex gefertigt. Die Vorteile dieses neuartigen Verbundwerkstoffes: Extrem hohe Flexibilität bei gleichzeitig großer Stabilität, Splitterfestigkeit, und Nichtentflammbarkeit. Eine sehr hohe Fertigungsqualität und das geringe Gewicht erlauben sogar einen Einsatz im Profirennsport. Die charakteristische schwarze Oberfläche zeichnet sich durch gute Bearbeitungsmöglichkeiten aus und garantiert professionelle Ergebnisse. Produkte aus Fiberflex von CSR-Automotive eignen sich dank bester Schneid- und Klebeeigenschaften in hervorragender Weise für Reparatur- und weitere Umbauarbeiten.Gleichmäßige Oberflächenstruktur ermöglicht eine Lackierung ohne große Vorarbeiten (Produkt ist unlackiert)Material ist flexibelOhne Gutachten, daher Einzelabnahme nach §21 StVZO erforderlich. Auf Wunsch liefern wir diesen Artikel mit einem Materialgutachten.
Radlaufverbreiterung für Porsche 911 / 993 vorne VB004
CSR-Automotive Kotflügelverbreiterung für Porsche 911 / 993Kotflügelverbreiterung passend für Porsche 911 993 Baujahr 1993-1998für alle VariantenVerbreiterungs-Set für vorne, wird an die Kotflügel verklebtInkl. Montagezubehör, sofern notwendigKotflügelverbreiterung ist aus dem innovativen und hochwertigen Material Fiberflex gefertigt. Die Vorteile dieses neuartigen Verbundwerkstoffes: Extrem hohe Flexibilität bei gleichzeitig großer Stabilität, Splitterfestigkeit, und Nichtentflammbarkeit. Eine sehr hohe Fertigungsqualität und das geringe Gewicht erlauben sogar einen Einsatz im Profirennsport. Die charakteristische schwarze Oberfläche zeichnet sich durch gute Bearbeitungsmöglichkeiten aus und garantiert professionelle Ergebnisse. Produkte aus Fiberflex von CSR-Automotive eignen sich dank bester Schneid- und Klebeeigenschaften in hervorragender Weise für Reparatur- und weitere Umbauarbeiten.Gleichmäßige Oberflächenstruktur ermöglicht eine Lackierung ohne große Vorarbeiten (Produkt ist unlackiert)Material ist flexibelOhne Gutachten, daher Einzelabnahme nach §21 StVZO erforderlich. Auf Wunsch liefern wir diesen Artikel mit einem Materialgutachten.