Tuning parts compatible with MITSUBISHI
Trunk edge protector for Mitsubishi Eclipse Cross LKS042-G
CSR-Automotive loading edge protection / loading edge cover for Mitsubishi Eclipse Cross glossy blackLoading edge protection compatible with Mitsubishi Eclipse Cross model year (facelift) 2021-Compatible with all model/body variantsScratch protection for your loading edgeNo registration required, as there are no structural/aerodynamic changes to the vehicleGood fit, as this is not a universal part but specifically designed for this vehicle type!Clean and easy mounting using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high immediate tack and high bond strengthThe installation with the 3M™ Adhesive tape PT 1100 is performed in three simple steps:Clean the substrate with the included 3M cleaning clothPeel off the protective liner from the preconfigured and pre-mounted tapeAdhere, done!3M™ Acrylic Plus Adhesive Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high instant tack that was developed specifically for the automotive sector and is ideally suited for mounting rigid accessory parts where an aesthetically visible edge is desired. PT1100 features very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100, stresses in the adhesive seam are excellently dissipated, so that extremely durable bonds are formed.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe loading edge protection is made of high-quality ABS material and features a high-gloss flawless surface - better than painted! (Note: remove the protective film after installation)Due to the black glossy surface, no painting is visually necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | Rear wing with ABE for Mitsubishi Lancer Evolution X HF168
CSR-Automotive Rear Spoiler | Rear Wing | Rear Lip | Tear-off Edge for Mitsubishi Lancer Evolution X with ABE (registration-free!)Rear spoiler suitable for Mitsubishi Lancer Evolution X model year 2009-2016Suitable for all model and body variantsWith ABE (general operating permit) and thus registration-freeGood fit, as this is not a universal part but specifically designed for this vehicle type!Clean and easy mounting using 3M™ Acrylic Plus Tape PT 1100 with extremely high immediate bonding and high bonding strengthThe installation with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective liner from the pre-cut and pre-mounted tapeStick on, done!3M™ Acrylic Plus Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high immediate bonding strength that was specifically developed for the automotive sector and is ideally suited for mounting rigid attachments where an aesthetically visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive seam are well dissipated, resulting in extremely durable joints.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear wing is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Rear window tint with ABE for Mitsubishi Lancer (CY0)/ Evolution X/ Evo X HSB129
CSR-Automotive Rear Window Spoiler for Mitsubishi Lancer (CY0)/ Evolution X/ Evo X with ABE/TTGRear window spoiler suitable forMitsubishi Lancer (CY0) model year 2007-2017compatible with the model/body variant(s) sedanMitsubishi Lancer model year 2009-2016compatible with the model/body variant(s) Evolution X / Evo XWith ABE (general operating permit) / TTG (type-approval) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using 3M™ Acrylic Plus Tape PT 1100 with extremely high immediate tack and high adhesionThe installation with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel the protective strip from the pre-cut and pre-assembled tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high immediate tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid add-on parts where an aesthetically visible edge is desired. PT1100 has very good adhesion to a wide variety of automotive surfaces, good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic property of PT1100, stresses in the adhesive joint are exceptionally dissipated, resulting in highly durable connections.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear window spoiler is made of high-quality material ABSIncludes mounting hardware, if necessaryIncludes mounting instructionsMaterial is flexible
Front spoiler | Cup spoiler lip with ABE for Mitsubishi Lancer Evolution X CSL887
CSR-Automotive Front Spoiler | Cup Spoiler Lip for Mitsubishi Lancer Evolution X with ABE (Registration-free!)Cup spoiler lip suitable for Mitsubishi Lancer Evolution X, years 2009-2016Suitable for all model/body variantsSporty appearance and integrated underrun protection for your original bumperIs riveted to the original bumper; mounting hardware includedWith ABE (General Operating Permit) and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made from high-quality material ABSIncludes mounting accessories, if necessaryIncludes mounting instructionsMaterial is flexible
Rear spoiler | rear wing with ABE for Mitsubishi Eclipse Cross HF937
CSR-Automotive rear spoiler | rear wing | rear lip | abrasion edge for Mitsubishi Eclipse Cross with ABE (no registration required!)Rear spoiler suitable for Mitsubishi Eclipse Cross model year (facelift) 2021-suitable for all model/body variantsWith ABE (General Operating Permit) and thus no registration requiredGood fit, as it is not a universal part but specifically developed for this vehicle type!Clean and easy installation using3M™ Acrylic Plus Tape PT 1100 with extremely high initial bond and high adhesionThe installation with the 3M™ Tape PT 1100 is carried out in three simple steps:Clean the surface with the included 3M cleaning clothPeel off the protective liner from the pre-cut and pre-mounted tapeStick it on, done!3M™ Acrylic Plus Tape PT 1100 is a four-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for mounting rigid attachments where an aesthetically visible edge is desired.High durability also in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistanceEasy removal without damage to the paintThe rear lip is made of high-quality ABS materialIncludes mounting instructionsThe material is flexible
Front spoiler | Cup spoiler lip with ABE for Mitsubishi Eclipse Cross CSL685
CSR-Automotive Front Spoiler | Cup Spoiler Lip for Mitsubishi Eclipse Cross with ABE (no registration required!)Cup spoiler lip suitable for Mitsubishi Eclipse Cross model year (facelift) 2021-Suitable for all model/body variantsSporty look and integrated underrun protection for your original bumperIs riveted to the original bumper, mounting hardware includedWith ABE (general operating permit) and thus no registration requiredGood fit, as it is not a universal part but specifically developed for this vehicle type!Cup spoiler lip is made of high-quality ABS materialIncludes mounting instructionsMaterial is flexible
easy²tune universal glue-on spoiler lip in carbon look ZB131-C
easy²tune - The universal spoiler lipTuning has never been this easy! easy2tune is the proven flexible spoiler lip from CSR-Automotive. Now new: In carbon look made of soft plasticFlexible spoiler lip with a wide range of applications. It can be used as Front lip,Side skirts,Rear lip, or edge protectionUsable on any vehicleEasy installation using 3M tape (already applied to the lip), easily adjustable and even paintableLength approx. 260 cm, can be shortened individuallyUniversal impact protection due to high formabilityMade from durable and tear-resistant plastic, weather- and car-wash-resistantMaterial: soft plastic in carbon lookBecause of the somewhat higher weight of this universal spoiler lip, we recommend screwing or riveting it every 10 cmIncludes mounting instructionsWith expert opinion and thus not requiring registration
easy²tune XXL universal spoiler lip for glue-on installation ZB144
Flexible XXL spoiler lip with a wide range of applications. Can be used as Front lip,Side skirts, Rear lip or Edge protectionUsable for every vehicleEasy mounting with 3M tape (already on the lip), easily adjustable and even paintableLength approx. 260 cm, individually shortenableUniversal impact protection thanks to high deformabilityMade of durable and tear-resistant foam rubber, weather- and car-wash resistantMaterial: Flexible plastic foamIncludes mounting instructionsWith expert appraisal and thus not requiring registration
easy²tune universal spoiler lip to be glued on in black ZB131
easy²tune - The universal spoiler lipNever has tuning been so easy! easy2tune is the new flexible spoiler lip from CSR-Automotive. Flexible spoiler lip with a wide range of applications. As front lip,side skirts, rear lip or edge protection usableUsable for every vehicleEasy installation via 3M tape (already attached to the lip), easily adjustable and even paintableLength approx. 260 cm, individually trimableUniversal impact protection due to high deformabilityMade of durable and tear-resistant foam rubber, weather- and car wash-resistantMaterial: Flexible plastic foamIncludes mounting instructionsWith expert assessment and thus exempt from registration
Headlight covers for Mitsubishi Colt CZC, Z30 SB154
CSR-Automotive Headlight Eyelids for Mitsubishi Colt CZC, Z30Headlight eyelids suitable for Mitsubishi Colt CZC Cabrio Year 2006-2009as well as suitable for Mitsubishi Colt Z30 CZ3/Colt Plus/ Colt five-doorYear 2004-11/2008Headlight eyelids pair - right / leftWith expert opinion and thus registration-freeGood fit, as this is not a universal part but specifically developed for this vehicle type!Clean and easy attachment using3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high initial tack and high adhesionThe assembly with the 3M™ Adhesive Tape PT 1100 is done in three simple steps: Clean the surface with the included 3M cleaning cloth Peel off the protective strip from the prefabricated and pre-mounted adhesive tape Attach, done! 3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high initial tack that was specifically developed for the automotive sector and is ideally suited for fastening rigid attachment parts where an aesthetic visible edge is desired. PT1100 has very good adhesion to a wide range of automotive surfaces, good internal strength, excellent long-term stability as well as very good adaptability to the surfaces to be bonded. Through the unique viscoelastic property of PT1100 stresses in the adhesive seam are excellently dissipated, resulting in extremely durable joints. High durability also in car washes, at high speeds and extreme temperatures and humidity as well as high shock and weather resistance Easy removal without damage to the headlightIncludes installation instructionsHeadlight eyelids are made of high-quality ABS materialEven surface texture enables coating without extensive pre-work (product is unpainted)Material is flexible
Lufthutze Dach für VW - Audi - BMW - Opel - Seat - VW LF001
CSR-Automotive Lufthutze / Lufteinlass Dach universalLufthutze Dach ist universal und passend für alle FahrzeugeLufthutze Dach ist auch passend für Fahrzeuge mit SchiebedachMit gutachterlicher Stellungnahme und somit eintragungsfreiInkl. Montagezubehör, sofern notwendigInklusive MontageanleitungLufthutze ist aus hochwertigem Material GFK gefertigtGleichmäßige Oberflächenstruktur ermöglicht eine Lackierung ohne große Vorarbeiten (Produkt ist unlackiert)Material ist flexibel